Domino G Series Page 62 Product Manual Download

Page: 62 / 172

Alignment

To view the print head alignment settings:

1. From the

Home

screen, select the

Settings

icon:

1.
2. The

Alignment

settings listed below are available:

Setting Name

Description

Forward offset (mm)

Set the distance between the point where the product detect

sensor is triggered and the point where the print is made.

Disable sensor (mm)

Set a distance to disable the product detect sensor after it

has been triggered.
The purpose of this setting is to prevent multiple prints on a

product.

Fixed length (mm)

Note

This setting is used if the "Repeat Times"

setting is different from 0 with "Sensor Mode".

Set the distance between 2 repeat prints.

Reverse offset (mm)

Note

This setting is used if "Bi-Direction" mode is

enabled. See

Bi-Direction on page 67

Set the distance for the second print, between the point

where the product detect sensor is triggered and the point

where the print is made.

INSTALLATION

EPT077343 EN - Issue 1 - 11 November 2022

Summary of Contents for G Series













































































































































































Search results

Summary of Contents for G Series

Reviews:

Related manuals for G Series

Brands by name

Popular brands

Domino G Series, Product Manual

Search results

Summary of Contents for G Series

Reviews:

Related manuals for G Series

Brands by name

Popular brands