manualshive.com logo in svg

Domino G Series, Product Manual

Share
Download
Domino G Series Product Manual Download Page 112

Add a Database Object

A database object lets a pre-defined part of the label (database object) be populated with data

from another source.
2 different types of database object can be created:

•

Database - Use a database file saved onto a USB memory device that is connected to the

•

printer.

•

VDC (Variable Database Connection) - Use data that is transmitted from an external device

•

via, TCP/IP, COM (RS485), INPUT. or Barcode Scanner (Connected via USB).

Database Text Object

This topic describes how to setup a database object, using a database file saved on a USB

memory device.
Valid database file formats:

•

.txt

•
•

.csv

•

To add a database object to the label template:

1. Put the database file onto a USB memory device. The image below is a simple .csv file that

1.

will be used as an example:

2. Connect the USB memory device to the printer.

2.

3. Select the 

Object 

icon: 

3.
4. Select 

Database.

4.
5. Select 

Load database

.

5.
6. Set the settings listed below:

6.

Setting Name

Description

File type

Choose the database file type, TXT or CSV.

OPERATION

112

EPT077343 EN - Issue 1 - 11 November 2022

Summary of Contents for G Series













































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands