Domino G Series Page 138 Product Manual Download

Page: 138 / 172

Name

Description

Content

Display a preview of the object.

1. Select

OK.

1.
2. Drag the object to a suitable location in the template, or use the arrow icons to reposition

the object:

3. To change the object's appearance, select the properties icon:

Note

The properties icon is not used, if the web browser interface is being used.

4. In the

General

tab, use the settings listed below to change the object's general

appearance:

Setting Name

Description

X (mm)

Set the horizontal position of the object in the template.

Y (mm)

Set the vertical position of the object in the template.

Width (mm)

Set the width of the object.

Height (mm)

Set the height of the object.

Scale mode

Set the scale mode of the object:

•

Scale - The width and height of the object can be set

•

independently.

•

Auto size - The width and height of the object is

•

controlled by the font size.

Angle

Rotate the object.

Lock

Lock the object to prevent it from being edited.

Visible

Make the object printable or not printable.

Font family

Set the font type.

Size (pt)

Set the font size.

Style

Choose:

•

Bold

•
•

Italic

•
•

Underlined.

•

OPERATION

138

EPT077343 EN - Issue 1 - 11 November 2022

Summary of Contents for G Series













































































































































































Search results

Summary of Contents for G Series

Reviews:

Related manuals for G Series

Brands by name

Popular brands

Domino G Series, Product Manual

Search results

Summary of Contents for G Series

Reviews:

Related manuals for G Series

Brands by name

Popular brands