Add a Static Graphics Object
Valid image file formats:
•
.jpg
•
•
.bmp
•
•
.png
•
•
.gif
•
To add a static graphic object to the label template:
1. Connect a USB memory device containing the image file to the printer.
1.
2. Select the
Object
icon:
2.
3. Select
Graphics.
3.
4. Set
Image type
as
Static
.
4.
5. Select the
Select image
icon:
5.
6. Open the D:/ drive:
6.
7. Choose the image file on the USB memory device and select the tick icon.
7.
8. Select
OK
.
8.
9. Drag the object to a suitable location in the template, or use the arrow icons to reposition
9.
the object:
10. To adjust the object's properties, select the properties icon:
10.
Note
The properties icon is not used, if the web browser interface is being used.
11. In the
General
tab, use the settings listed below to change the object's general
11.
appearance:
Setting Name
Description
X (mm)
Set the horizontal position of the object in the template.
Y (mm)
Set the vertical position of the object in the template.
Width (mm)
Set the width of the object.
Height (mm)
Set the height of the object.
OPERATION
126
EPT077343 EN - Issue 1 - 11 November 2022
Summary of Contents for G Series
Page 1: ...G Series Product Manual G50i ...
Page 42: ...7 Fit the print head 7 INSTALLATION 42 EPT077343 EN Issue 1 11 November 2022 ...
Page 167: ...MAINTENANCE TROUBLESHOOTING EPT077343 EN Issue 1 11 November 2022 167 ...
Page 170: ...MAINTENANCE TROUBLESHOOTING 170 EPT077343 EN Issue 1 11 November 2022 ...
