manualshive.com logo in svg

Domino G Series, Product Manual

Share
Download
Domino G Series Product Manual Download Page 159

3. Remove the protective cover from the new ink cartridge.

3.
4. If the cartridge is new, clean the electrical contacts with an ethanol wipe, to remove

4.

corrosion protection.

Note

Cleaning wipe part number: EPT039697

5. Use a new/clean lint-free cloth to wipe the ink cartridge nozzles at a 45° angle.

5.

Note

The 45° angle stops debris from one nozzle contaminating the next nozzle.

CAUTION

Sensitive Equipment. Risk of Equipment Damage.

Do not use an ethanol wipe or any other chemical to clean the cartridge

nozzles.

Use a new/clean lint-free cloth. If chemicals are used to clean the cartridge, the

nozzles may be damaged.

6. Insert the ink cartridge into the print head and close the print head latch.

6.

MAINTENANCE & TROUBLESHOOTING

EPT077343 EN - Issue 1 - 11 November 2022

159

Summary of Contents for G Series













































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands