DOGA MDT Series, Instruction Manual

Page: 52 / 84

Instructions manual / MDT Series & MDTC38
60429 08/21 52
Model selection mode
Unit Range Initial
OFF- ON OFF
Description ON : model selection on operation screen
or IO’s
OFF : Preset and MA/MB selection on operation screen
or IO’s
Preset/Model selection on panel
Unit Range Initial
Preset - Model Preset
Description Allow Model or Preset selection on operation screen
This setting is automatically set identical to above setting ‘Model
selection mode’
Model start by barcode
Unit Range Initial
OFF- ON OFF
Description ON : model start only after barcode scan
OFF : model can start without bar code scan
Automatic driver lock (model)
Unit Range Initial
OFF- ON NO
Description Driver is locked in non tightening model steps
Model auto restart
Unit Range Initial
OFF- ON OFF
Description ON : model restart automatically after previous one is completed
OFF : when model is finished driver is locked and NOP model 0 is auto
selected. A model have to be selected.
Crowfoot
Unit Range Initial
OFF ON OFF
Description ON : activate crowfoot setting below:
Gear ratio, efficiency, reverse torque and speed.
Crowfoot ratio
Unit Range Initial
0 to 10 1
Description Crowfoot gear ratio including angle head
Crowfoot efficiency (%)
Unit Range Initial
% 0 to 150 100
Description Crowfoot gear ratio including angle head
Crowfoot reverse torque
Unit Range Initial
Set up in controller Tool range 0
Description For open crowfoot : max torque for return to open position detection
Crowfoot reverse speed
Unit Range Initial
rpm Tool range 100
Description For open crowfoot : speed for return to open position