DOGA MDT Series, Instruction Manual

Page: 41 / 84

Instructions manual / MDT Series & MDTC38
60429 08/21 41
7.8 Model settings
They are 15 sequencing models of 20 steps with assignable tightening
program batch counting and logical IO management.
Model should be activated in controller parameters.
The digital inputs for preset # select becomes model # select
automatically.
Each step can have one of the above commands with related setting
value
There are 5 different type of command : Input, Output, Fastening,Time
delay and bar code scan.
Fastening setting : The fastening with counting number follows all settings and features in Screw
Count menu except the number of screw.
Input/Output setting : IO port used in models should be unassigned (None) in IO settings
Inputs port 9 to 15 are unassigned and dedicated to models
Possible settings
The spindle can be locked automaticaly in all steps except Fastening step, by selecting
Enable on the menu Controller ‘Auto lock’ (model)’