DOGA MDT Series, Instruction Manual

Page: 42 / 84

Instructions manual / MDT Series & MDTC38
60429 08/21 42
◆
Command details
Command Description Data 1 Data 2
Input Mapping digital Input
Input # select
from 1 - 8
0 : No output
→
NG
1 : Active High
2 : Active Low
3 : High status
4 : Low status
Output Mapping digital Output
Output # select
from 1 - 8
0 : No Output
→
NG
1 : On
2 : Off
3 : On for 0.5s and Off
4 : On for 1.0s and Off
Fastening Start fastening
Preset #
from 1
–
13
14 : MA*
15 : MB*
Count number from 1 - 250
Delay Delay time - 1 to 250 (unit: 0.1s) 0.1 - 25 sec.
Bar code Require bar code scan None Barcode step data :
‘
1 to 30
’ registered barcode(step)
‘
0
’
any barcode scan
* To select preset 14 and 15, please program preset 14 and 15 in a one step multisequence .
Bar code : receiving a barcode to go to next step
•
If model barcode step data is set between 1 to 30 :
It can go next step by receiving only barcode data scanned
in setting menu
‘Barcode(step)
•
If model barcode step data is set 0 :
It can go next step by receiving any barcode data
Can be used to merged a part barcode with tightening
results