DOGA MDT Series, Instruction Manual

Page: 25 / 84

Instructions manual / MDT Series & MDTC38
60429 08/21 25
CONTROLLER MDTC
6.1 Specification
Model : one controller MDTC38 to drive all MTD screwdrivers or spindles models.
no Item Detail model MDTC38
1 Input AC230V, 50/60Hz 2.5A
2 Output DC38V 3.5A
–
1 output for 1 screwdriver
3 Fuse 230V 5A
4 Operating environment 0 ~ 40
℃
/ 15 ~ 80% RH ( without dew )
5 Front panel
7” Color LCD with touch screen
6 Communication 1 x RS232C, 1 x Ethernet
7 Protocol Modbus, Open protocol
8 I/O
Connector 25P D-Sub female
Inputs : port 1 to 8 flexible input
port 9 to 15 inputs dedicated to model steps
Outputs : port 1 to 8 flexible outputs
9 No. of program(Preset) 15 presets
10 No. of Job(Model) 15 jobs with each 20 steps
11 Type of steps Fastening, Delay, Input & Output, Barcode
12 Torque compensation - 10% ~ +10%
13 Screwdriver recognition
Auto detection of connected driver when power ON of
controller and provide the verification result on the
selected tool model
14 Error display Error code display ( 3 groups )
15 Fastening result
Fastening data verification (NG/OK) by the preset
pattern of angle.
16 Language English, French, Spanish, German, Czech
17 Firmware update By SD card
18 Parameter setting
On LCD screen, Web server, PC software, Protocol via
com port
19 Mounting bracket Standard VESA brackets