Dodge 2015 RAM Owner'S Manual Download Page 67

Page: 67 / 366

6. Press and release the

arrow button to exit the DID

screen.

Vehicles Not Equipped With Passive Entry

1. Without pressing the brake pedal, cycle the ignition to

the ON/RUN position (do not start the engine.)

2. Press and release the

DOWN

arrow button to scroll

downward through the main menu to “

Vehicle Info

”.

3. Press and release the

RIGHT

arrow button to access

the ”

Oil Life

” screen.

4. Press and hold the

RIGHT

arrow button for one

second to access the ”

Oil Life Reset

” screen.

5. Press and release the

DOWN

arrow button to select

“Yes”, then press and release the Right arrow button to
select reset of the Oil Life.

6. Press and release the

arrow button to exit the DID

screen.

NOTE:

If the indicator message illuminates when you

start the vehicle, the oil change indicator system did not
reset. If necessary, repeat this procedure.

Vehicle Information (Customer Information
Features)

Press and release the UP

arrow or DOWN

arrow

button until “Vehicle Info” displays in the Driver Infor-
mation Display (DID). Press the RIGHT

arrow or

LEFT

arrow button to scroll through the available

Vehicle Information sub menu(s) to display anyone of the
following choices.

UNDERSTANDING YOUR INSTRUMENT PANEL

Summary of Contents for 2015 RAM















































































































































































































































































































































































Search results

Summary of Contents for 2015 RAM

Reviews:

Brands by name

Popular brands

Dodge 2015 RAM, Owner'S Manual

Search results

Summary of Contents for 2015 RAM

Reviews:

Brands by name

Popular brands