manualshive.com logo in svg

Dodge 2011 Challenger, Owner'S Manual

The Dodge 2011 Challenger is a powerhouse of a vehicle, providing an exhilarating driving experience. To ensure you get the most out of your Challenger, make sure to download the free user manual from manualshive.com. This manual offers detailed specifications and instructions to help you fully enjoy this iconic car.

Share
Download
background image

6. Remove the scissors jack and lug wrench from the
spare wheel as an assembly. Turn the jack screw to the left
to loosen the lug wrench, and remove the wrench from
the jack assembly.

WARNING!

•

A loose tire or jack thrown forward in a collision
or hard stop could endanger the occupants of the
vehicle. Always stow the jack parts and the spare
tire in the places provided.

•

Have the deflated (flat) tire repaired or replaced
immediately.

Preparations For Jacking

1. Park the vehicle on a firm, level surface as far from the
edge of the roadway as possible. Avoid icy or slippery
areas.

WARNING!

Do not attempt to change a tire on the side of the
vehicle close to moving traffic, pull far enough off
the road to avoid being hit when operating the jack
or changing the wheel.

2. Turn on the Hazard Warning flasher.

3. Set the parking brake.

4. Place the shift lever into PARK.

5. Turn OFF the ignition.

6

WHAT TO DO IN EMERGENCIES

363

Summary of Contents for 2011 Challenger











































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2011 Challenger

Calira 811 Manual preview
811
Brand: Calira Pages: 14
Vauxhall Cascada Quick Reference Manual preview
Cascada
Brand: Vauxhall Pages: 2
Kia CADENZA 2019 Features & Functions Manual preview
CADENZA 2019
Brand: Kia Pages: 54
Metra Electronics 99-9001 Installation Instructions preview
99-9001
Brand: Metra Electronics Pages: 2
muth signal mirror 2005-2009 Ford Mustang Installation Instruction preview
signal mirror 2005-2009 Ford Mustang
Brand: muth Pages: 9
XTC ATS-POL-GBU Manual preview
ATS-POL-GBU
Brand: XTC Pages: 4
Cadillac 1999 DeVille Owner'S Manual preview
1999 DeVille
Brand: Cadillac Pages: 368
Luverne 205760 Installation Instructions preview
205760
Brand: Luverne Pages: 3
Navman B2+ User Manual preview
B2+
Brand: Navman Pages: 27
Xblitz Mirror 2016 User Manual preview
Mirror 2016
Brand: Xblitz Pages: 30
Big Mikes Performance Parts STO N SHO SNS 144 Installation Procedures Manual preview
STO N SHO SNS 144
Brand: Big Mikes Performance Parts Pages: 7
Lincoln MKZ 2018 Quick Reference Manual preview
MKZ 2018
Brand: Lincoln Pages: 10
AEM 30-3500 Instruction Manual preview
30-3500
Brand: AEM Pages: 27
Hama 00 123530 Operating Instructions preview
00 123530
Brand: Hama Pages: 4
Volvo 1992 850 Service And Repair Manual preview
1992 850
Brand: Volvo Pages: 230
Skoda Fabia Combi 5J Fitting Instructions preview
Fabia Combi 5J
Brand: Skoda Pages: 2
Waeco Perfect Fit MBM120 Installation Instructions preview
Perfect Fit MBM120
Brand: Waeco Pages: 3
Or-Fab HD Bumper Installation Instructions preview
HD Bumper
Brand: Or-Fab Pages: 4

Brands by name

Popular brands

Load more brands