Dodge 2011 Challenger Owner'S Manual Download Page 118

Page: 118 / 490

Send Messages:

You can send messages using Uconnect™ Phone. To send
a new message:

•

Press the

button.

•

After the “Ready” prompt and the following beep, say
“SMS Send” or “Send Message.”

•

You can either say the message you wish to send or say
“List Messages.” There are 20 preset messages.

To send a message, press the

button while the

system is listing the message and say “Send.”

Uconnect™ Phone will prompt you to say the name or
number of the person you wish to send the message to.

List of Preset Messages:

1. Yes

2. No

3. Where are you?

4. I need more direction.

5. L O L

6. Why

7. I love you

8. Call me

9. Call me later

10. Thanks

11. See You in 15 minutes

12. I am on my way

13. I’ll be late

14. Are you there yet?

15. Where are we meeting?

116

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Summary of Contents for 2011 Challenger











































































































































































































































































































































































































































































































Search results

Summary of Contents for 2011 Challenger

Reviews:

Related manuals for 2011 Challenger

Brands by name

Popular brands

Dodge 2011 Challenger, Owner'S Manual

Search results

Summary of Contents for 2011 Challenger

Reviews:

Related manuals for 2011 Challenger

Brands by name

Popular brands