Dodge 2011 Challenger Owner'S Manual Download Page 340 | Manualshive

Page: 340 / 490

background image

Trailer Towing Weights (Maximum Trailer Weight Ratings)

The following chart provides the maximum trailer weight ratings towable for your given drivetrain.

Engine/Transmission

Frontal Area

Max. GTW (Gross Trailer Wt.)

Max. Tongue Wt.

3.6L Automatic

12 sq ft (1.11 sq m)

1,000 lbs (454 kg)

100 lbs (45 kg)

5.7L Automatic

12 sq ft (1.11 sq m)

1,000 lbs (454 kg)

100 lbs (45 kg)

Refer to local laws for maximum trailer towing speeds

Trailer And Tongue Weight

Always load a trailer with 60% to 65% of the weight in
the front of the trailer. This places 10% to 15% of the
Gross Trailer Weight (GTW) on the tow hitch of your
vehicle. Loads balanced over the wheels or heavier in the
rear can cause the trailer to sway

severely

side to side

which will cause loss of control of the vehicle and trailer.
Failure to load trailers heavier in front is the cause of
many trailer collisions.

Never exceed the maximum tongue weight stamped on
your bumper or trailer hitch.

338

STARTING AND OPERATING

«
...
338
339
340
341
342
...
»

Summary of Contents for 2011 Challenger











































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2011 Challenger

Brand: Yakima Pages: 8

Brand: CITROEN Pages: 52

Brand: Chevrolet Pages: 2

Brand: Whipple Pages: 3

Brand: BrandMotion Pages: 2

Brand: JKS Pages: 3

Brand: T-Mobile Pages: 2

ULTIMATE SPEED 296713

Brand: walser Pages: 10

Brand: Mercedes-Benz Pages: 373

Brand: Prorack Pages: 15

Brand: Honda Pages: 10

2DA 008 136-031

Brand: Hella Pages: 2

Brand: Z Flash Pages: 4

Brand: Gentex Pages: 2

Full Display Mirror

Brand: Gentex Pages: 18

Brand: Safe Fleet Pages: 2

V2 Two-Bike Carrier

Brand: LetsGoAero Pages: 2

Brand: Scion Pages: 24

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands