Docomo Style P-06A, Instruction Manual

Page: 414 / 565

412
PC
Co
nn
ect
io
n
The following hardware and software programs are required besides the
FOMA phone and personal computer:
p FOMA USB Cable with Charge Function 01/02 (option) or FOMA USB Cable (option)
p Provided “P-06A CD-ROM”
The following two ways are available for connecting the FOMA phone to another
device:
Connect the FOMA phone to a personal computer provided with the USB port
using the FOMA USB Cable with Charge Function 01/02 (option).
This way of connection applies to all types of communications such as packet
communication, 64K data communication, and data transfer.
p Set “USB mode setting” to “Communication mode”. (See page 322)
p
You need to install the “FOMA communication setup files” (driver) before use.
By using infrared rays, you can send/receive data between your FOMA phone and
another FOMA phone, mobile phone, or personal computer provided with the
infrared data exchange function. (See page 326)
This applies only to data transfer.
Necessary Devices
Information
p
Use a dedicated “FOMA USB Cable with Charge Function 01/02” or “FOMA USB
Cable”. The USB cable for personal computers cannot be used because the shape of
the connector differs.
p If you use a USB hub, the devices may not work correctly.
Connect FOMA Phone to Other Devices
Use FOMA USB Cable with Charge Function 01/02
Use Infrared Data Exchange
When you use the FOMA USB Cable with Charge Function 01/02 (option),
install the “FOMA communication setup files” (driver).
Preparation Flow for Data Transfer
(OBEX™ Communication)
Download and install the “FOMA communication setup files” (driver).
p
Install the FOMA communication setup files from the provided CD-ROM or download
them from the DOCOMO web page and install.
Data transfer