Docomo Style P-06A, Instruction Manual, Page: 245 / 565

243
i-
α
pp
li
You can check whether a software program has started automatically
and properly. Also, you can check the information of start failure from IC
card. Up to three records of automatic start, a record of automatic start
set by i-
α
ppli, and a record of start failure from IC card are stored.
1
m
i-
α
ppli
i α
ppli info Auto start info
StartO . . . . .Started automatically and properly.
StartX . . . . . .Did not start automatically.
When “ ” is displayed, you can press
O o
( ) to start the
software program.
Start– . . . . . .Has not started yet.
Auto Start Info
Information
p
Software programs do not start automatically in the following cases:
・ When the FOMA phone is turned off
・ When the date and time are not set
・
When another function is working
・ During Lock All
・ During Personal Data Lock
・
During playback of animations/Flash movies
・ When the time set for automatic start is identical to the reserved time set for
“Software update”, or the time set for an alarm of “Alarm”, “Schedule” or “ToDo”,
“Book program” or “Timer recording”
・ When a start time has been specified to the same software program within 10
minutes from the previous auto-start
p
If automatic start fails, “ ” appears on the desktop. Select the icon to bring up the
Auto Start Info.
You can set an i-
α
ppli program for the Stand-by display. Once set, the
i-
α
ppli Stand-by display automatically appears each time you bring up
the Stand-by display.
1
Software list
i
( ) Software setting
Stand-by set ON or OFF
l
( )
“ ” is displayed for the software program set as the Stand-by display.
“ ” or “ ” is displayed while an i-
α
ppli Stand-by display is running.
From the i-
α
ppli Stand-by display, press
r
.
“ ” or “ ” changes to a blinking “ ” or “ ” and then you can operate the i-
α
ppli
program as a normal one.
p
To return to the i-
α
ppli Stand-by display, press and hold
r
for at least one second
or press
h
; then select “Ended”. To release the i-
α
ppli Stand-by display, select
“Terminated”, and select “YES”.
<i-
α
ppli Stand-by Display>
Operating i-
α
ppli Stand-by Display
Software Setting (Stand-by Set)
To operate an i-
α
ppli program as a normal i-
α
ppli program
when an i-
α
ppli Stand-by display is running