Docomo Style P-06A, Instruction Manual

Page: 394 / 565

392
Ne
two
rk Servi
ces
You can automatically connect the calls coming from the phone numbers
stored in the Phonebook to the Voice Mail Service Center regardless of
the Activate/Deactivate setting for the Service.
You can specify up to 20 phone numbers.
This setting is valid only when the caller notifies his/her phone number.
It is advisable to activate “Caller ID request” at the same time.
1
Detailed Phonebook display
i
( ) Restrictions
Enter your Terminal Security Code Voice mail
“Voice mail” is indicated by “
★
”.
p To release “Voice mail”, perform the same operation.
When a call comes in during a call, this service notifies you of it by the
ring tone in call, and enables you to place the current call on hold to
answer the new call.
Further, you can make a call to another person putting the current call on
hold.
p To use Call Waiting Service, set “Arrival call act” (see page 398) to “Answer” in
advance. When another option is set, you cannot answer a voice call during a voice
call even if you set “Call waiting” to “Activate”.
Forward Specified Calls to Voice Mail Center
Information
p When a call comes in from the phone number set with this function, the ring tone
sounds for about one second and then the call is connected to the Voice Mail Service
Center. You will be notified of the call by the icons on the desktop (see page 68 and
page 107) and “Received calls”.
p Even if you set this function, all incoming calls are not connected to the Voice Mail
Service Center when you set “Personal data lock” while Voice Mail Service is
deactivated.
<Call Waiting>
Using Call Waiting Service
1
m
Service Call waiting
Do the following operations.
1
Another call comes in during a call
d
The current call is automatically put on hold so that you can receive another call.
p
“Multi calling” is displayed when there is the party on hold.
p Each time you press
d
, you can switch the parties you can talk with.
Use Call Waiting Service
Item Operation/Explanation
Activate YES
Deactivate YES
Check setting You can check the setting contents of Call Waiting Service.
Answer an Incoming Call during a Call
Information
p For an incoming call or communication that is not supported by Call Waiting, press
- d
from the Call Receiving display to show the confirmation display telling that you
can answer a new call if you end the current call. Press
- h
to end the current call,
and then the Call Receiving display appears. When you select “OK”, the Call
Receiving display during a call returns.
p If a call comes in during a videophone call, the FOMA phone operates as follows:
・ The moving image, i-motion movie or Flash movie set as the image for incoming
calls is not displayed.
・ A “Pre-installed” substitute image is sent to the other party of the current call.
・ The vibrator does not work.
p When a voice call comes in while dialing 117, you hear an in-call ring tone but cannot
answer that call. The call is recorded as a missed call in Received Calls.