Docomo Style P-06A, Instruction Manual

Page: 75 / 565

73
V
oic
e
/V
id
e
op
ho
ne
C
a
lls
You can switch the display locations of the received image and the sent
image.
1
During a videophone call, press
c
( ).
p
Each time you press
c
( ), the displays
switch.
Switch Image Display Positions
+ c
c
+ c c
You can adjust the magnification for the camera image to be sent to the
other party. During a videophone call, the maximum magnification of the
camera is about 6.8 times.
1
During a videophone call
Use
N o
to adjust the magnification.
p
The former zoom setting returns when the videophone call ends.
Zoom
At videophone start-up Wide
Function Menu during Videophone Call
Function menu Operation/Explanation
CHG to voice call See page 51.
Send DTMF tone/
DTMF tone OFF During a Chara-den call, you can switch to the DTMF
Transmission Mode that enables you to enter the data from the
numeric keys and to send DTMF (touch-tone signals). You can
operate it only during a Chara-den call.
p
“Send DTMF tone” is displayed when the mode is not DTMF
Transmission Mode and “DTMF tone OFF” is displayed in
DTMF Transmission Mode.
p In DTMF Transmission Mode, you cannot operate the action of
Chara-den images.
p The DTMF tone may not be received depending on the device
of a receiving end.
V.phone settings
(Visual preference) See page 74.
V.phone settings
(Brightness) You can adjust the brightness of the camera image to be sent to
other party to -3 (dark) t3 (bright).
Brightness Select a brightness level.
At videophone
start-up
0