Docomo Style P-06A, Instruction Manual

Page: 69 / 565

67
V
oic
e
/V
id
e
op
ho
ne
C
a
lls
Public Mode is an auto-answer service that puts importance on manners
in public spaces. Once you activate Public Mode, the guidance is played
back telling that you cannot answer the call as you are currently driving
or in a place (a train, bus, movie theater, etc.) where you should refrain
from answering the call. Then the call is disconnected.
1
Press and hold
a
for at least one second.
Public Mode is activated and “ ” is displayed.
When a call comes in, the guidance “The person you are calling is currently driving
or in an area where cell phone should not be used. Please try again later.” is played
back for incoming calls.
p To deactivate Public Mode, perform the same operation. Then, Public Mode is
deactivated and “
” disappears.
<Public Mode (Drive Mode)>
Using Public Mode (Drive Mode)
Information
p
You can activate/deactivate Public Mode only from the Stand-by display. You can
activate/deactivate Public Mode even when “
” is displayed.
p
You can make calls as usual even during Public Mode.
p If you make an emergency call at 110/119/118, Public Mode is released.
p When Public Mode and Manner Mode are activated simultaneously, Public Mode has
priority.
p If a “User unset” call comes in while “Caller ID request” is set to “Activate”, the Caller
ID Request guidance is played back. (The Public Mode guidance is not played back.)
p You cannot use this function during data communication.
・ Even when a call comes in, the ring tone does not sound. The “Missed call” icon
appears on the display and the call is stored in “Received calls”. The guidance is
played back to the caller to the effect that you are currently driving or in an area where
mobile phones should not be used. Then the call is disconnected.
However, when the power is off or “
” is displayed, the caller hears the
out-of-service area guidance instead of the Public Mode guidance.
・ The ring tone does not sound and the Call/Charging indicator does not flicker even
when mail or a message comes in. In addition, the set vibrator does not work.
・
The ring tone for 64K data communication, alarm tone, and charging confirmation tone
do not sound, and a melody while an i-
α
ppli program is running is not played back.
・ The tickers of i-Channel are not displayed.
・
See page 68 for how Public Mode (Drive Mode) and each network service work for
incoming calls when they are simultaneously activated.
Public Mode (Power Off) is an auto-answer service that puts importance
on manners in public spaces. Once you activate Public Mode (Power Off),
the guidance is played back telling that you cannot answer the call as
you are currently in a place (hospital, airplane, around priority seat in a
train, etc.) where use is prohibited. Then the call is disconnected.
1
Enter “
:
25251”
d
Public Mode (Power Off) is set. (Nothing is changed on the Stand-by display.)
After setting Public Mode (Power Off) and turning off the power, the guidance “The
person you are calling is currently in an area where use is prohibited. Please try
again later.” is played back for incoming calls.
p
To release Public Mode (Power Off), dial “
:
25250”.
p To check the setting for Public Mode (Power Off), dial “
:
25259”.
When Public Mode (Drive Mode) is activated
<Public Mode (Power Off)>
Using Public Mode (Power Off)