Docomo Style P-06A, Instruction Manual, Page: 246 / 565

244
i-
α
ppl
i
Information
p
If you turn off the FOMA phone while the i-
α
ppli Stand-by display is running, the
confirmation display appears asking whether to start the i-
α
ppli program when you
turn on the power again.
p You can set only one software program for the i-
α
ppli Stand-by display.
p
Some i-
α
ppli programs cannot be set for the Stand-by display.
p With some software programs set as the i-
α
ppli Stand-by display, you can press a key
to go from the normal i-
α
ppli status to the i-
α
ppli Stand-by display status. However,
you cannot return to the i-
α
ppli Stand-by display if another menu function is running.
p
Note that you might not be able to receive timely information if you have set “Software
setting (Stand-by net)” to “OFF”.
p
You cannot use the Web To function and the Phone To/AV Phone To function from
the i-
α
ppli Stand-by display.
p
If the software program which connects to the network is set for the i-
α
ppli Stand-by
display, it might not operate successfully because of radio wave conditions or other
factors.
p When you bring up the Stand-by display while a menu function is operating, the image
set for “Stand-by display” of “Display setting” will be displayed, even when the i-
α
ppli
Stand-by display is set.
p When communicating frequency is extremely high in a certain period of time while an
i-
α
ppli program is running as the i-
α
ppli Stand-by display, the confirmation display
appears. When you press
- r
, the confirmation display appears asking whether to
continue communication.
p If you set Lock All or Personal Data Lock when the i-
α
ppli Stand-by display is shown,
the i-
α
ppli Stand-by display will end. If you set Lock All, the image set for “Stand-by
display” of “Display setting” will be displayed and if you set Personal Data Lock, the
default Stand-by display will be displayed. The i-
α
ppli Stand-by display will return
when you release each lock.
You can set whether to permit communication for when the i-
α
ppli
Stand-by display is running.
1
Software list
i
( ) Software setting
Stand-by net ON or OFF
l
( )
You can temporarily end the running i-
α
ppli Stand-by display. Also, you
can release the i-
α
ppli Stand-by display.
1
m
Settings Display Display setting
Stand-by display End
i α
ppli display
End or Terminate
p When you select “Terminate”, select “YES”.
When the i-
α
ppli Stand-by display does not end successfully, you can
check the date/time and its reason.
1 m
i-
α
ppli
i α
ppli info End stand-by info
p
When “ ” is displayed on the End Stand-by Info display, press
i
( ),
and select “Copy info” to copy the information. Select “Delete info”, and select
“YES” to delete the information.
Software Setting (Stand-by Net)
End Stand-by Display
End Stand-by Info