Docomo Style P-06A, Instruction Manual

Page: 230 / 565

228
Mai
l
You can set the characters you can enter into the text of SMS messages.
You can set to enter only half-pitch alphanumeric characters and
half-pitch symbols.
1
l
SMS settings SMS input character Select an item.
Japanese (70char.) . . . You can enter full-pitch and half-pitch characters. You
cannot enter pictographs except “ ” and “ ” (see
page 446). You can enter up to 70 characters for the text.
English (160char.) . . . . You can enter only half-pitch alphanumeric characters
and half-pitch symbols. You can enter up to 160
characters for the text.
p When you operate from the Function menu of the SMS Composition display, the
setting is effective only for the SMS message you are composing.
You can set the address and “Type of number” for the SMS Center. This
setting is for getting any service other than SMS Service you currently use.
1 l
SMS settings SMS center selection
User setting Enter an address
International or Unknown
p You can enter up to 20 half-pitch characters for the address. However, if “
:
” or
“#” is included, you cannot set it for “International”.
p You can reset User Setting to “DoCoMo” by Reset Enter your Terminal Security
Code YES.
You can send mail messages or browse received mail messages on the
i-mode site.
p You can use only in B Mode or Dual Mode of 2in1.
p
For details on Web mail, refer to “Mobile Phone User’s Guide [2in1]”.
1 l
Web mail
Operate following the instructions on the display.
SMS Input Character
SMS Center Selection
※ Normally, you do not need to change this setting.
<Web Mail>
Using Web Mail