Docomo SO-01C, Instruction Manual

Page: 84 / 220

82 Settings
S O-01C_English
Using Wi-Fi, you can access the Internet via
Wi-Fi network with your FOMA terminal.
･
Even when Wi-Fi is ON, packet
communication is available. However, while
you connect Wi-Fi network, Wi-Fi comes
first.
･
When a Wi-Fi network is disconnected,
connection is automatically switched to a
3G/GPRS network. Note that packet
communication fee applies for using 3G/
GPRS network.
Before using Wi-Fi
To use Wi-Fi, turn on Wi-Fi and search
available Wi-Fi network, then connect it.
･
To access the Internet using Wi-Fi, connect
to Wi-Fi network in advance.
❖
Information
･ Make sure to receive enough signal strength for
using Wi-Fi. The signal strength of the Wi-Fi
network varies by the location of the FOMA
terminal. Moving closer to the Wi-Fi router might
enhance the signal strength.
1
From the Settings screen (P.79),
tap [Wireless & networks].
2
Mark [Wi-Fi] checkbox.
･ The FOMA terminal scans for
available Wi-Fi networks.
❖
Information
･ It may take a few seconds before the Wi-Fi
connection is ON.
1
From the Settings screen (P.79),
tap [Wireless & networks]
X
[Wi-Fi
settings].
･ Available Wi-Fi networks are
displayed under [Wi-Fi networks]. The
available networks may be open or
secured. This is indicated by
or
next to the Wi-Fi network name.
2
Select Wi-Fi network you want to
connect, tap [Connect]
･ If you are trying to connect to a
protected Wi-Fi network, you are
asked to enter the security key for that
Wi-Fi network before you can connect
to it.
About Wi-Fi Turning on Wi-Fi
Connecting to a Wi-Fi network
Continued on next page Continued on next page
SO-01C_E.book 82 ページ ２０１１年３月１０日 木曜日 午後２時７分