75
Vo
ice
/V
id
eo
pho
ne
Cal
ls
/P
ush
Ta
lk
You can switch the display locations of the received image and the sent
image.
1
During a videophone call, press
c
(
).
Each time you press
c
(
), the displays
switch.
Switch Image Display Positions
+
c
c
+
c
c
You can adjust the magnification for the camera image to be sent to the
other party.
1
During a videophone call
Use
N
o
to adjust the magnification.
The former zoom setting returns when the videophone call ends.
Zoom
At videophone start-up
Wide
Function Menu during Videophone Call
CHG to voice call
See page 53.
Talk on BT/Phone
You can set whether to communicate through the FOMA
terminal or a Bluetooth device. (See page 426)
Send DTMF tone/
DTMF tone OFF
During a Chara-den call, you can switch to the DTMF
Transmission Mode that enables you to enter the data from
the numeric keys and to send DTMF (touch-tone signals). You
can operate it only during a Chara-den call.
“Send DTMF tone” is displayed when the mode is not DTMF
Transmission Mode and “DTMF tone OFF” is displayed in
DTMF Transmission Mode.
In DTMF Transmission Mode, you cannot operate the action
of Chara-den images.
The DTMF tone may not be received depending on the
device of a receiving end.
V.phone settings
Visual preference
See page 76.
Brightness
You can adjust the brightness of the camera image to be sent
to other party to -3 (dark) t3 (bright).
Select a brightness level.
At videophone
start-up
0
