122
So
und
/S
cree
n/
Li
gh
t S
e
tt
in
gs
When you have a missed call, new mail, new chat mail, or new Message R/F
(When the “Missed call” icon, “New mail” icon, “Chat mail”, or “Message R/F” icon is
displayed on the Stand-by display.)
If “Info notice setting” is set to “ON”, a double-beep tone sounds and the Call/Charging
indicator lights for about five seconds.
If “Info notice setting” is set to “
ボイス
(voice)” in Japanese display, a beep tone sounds
and a voice message announces that you have new mail, a missed call, and so on, and
the Call/Charging indicator lights for about five seconds.
When “Info notice setting” is set to “
ボイス
(voice)” in Japanese display, and a new
Message R/F comes in, a voice message announces that you have new mail.
If you press
>
again while the voice is being played back, you can stop it.
When you have no missed calls, new mail, new chat mail, or new Message R/F
If “Info notice setting” is set to “ON”, or “
ボイス
(voice)” in Japanese display, a triple-beep
tone sounds, and the Call/Charging indicator flickers for about five seconds.
Even when “Info notice setting” is set to “
ボイス
(voice)” in Japanese display, the notice
is not made by voice.
If you press
.
>
while the FOMA terminal is closed
Information
You cannot check for the mail messages held at the i-mode Center by this function.
The confirmation function might not work depending on the function being activated.
The sound volume for electronic sound cannot be changed.
“
ボイス
(voice)” sounds at the volume set for “Phone” of “Ring volume”. If “Step” is
set, the sound volume is Level 2.
The missed call, new mail, and new chat mail are informed by both the Call/Charging
indicator and the vibrator unless “Phone” of “Vibrator” has been set to “OFF”.
The vibrator notifies the information as follows:
・
Vibrates for about 1 second when you have a missed call, new mail, or new chat
mail message.
・
Vibrates for about 0.2 second when you have no missed calls, new mail, or new
chat mail message.
If you open the FOMA terminal during notification, it stops.
1
m
Set./Service
Display
Font
Font 1, Font 2, or Font 3
You can set the font and color of names stored in the Phonebook and
phone numbers displayed on the following displays:
■
Font of dial number
・
Dialing/Call Receiving display
・
Dialed Calls/Received Calls/Detailed Redial display
・
Detailed Sent Chaku-moji message
■
Font color
・
Dialing/Call Receiving/Talking display
・
Dialed Calls/Received Calls/Redial
・
Detailed Sent Chaku-moji message
・
Sent/Received Address list
When you use 2in1, the setting here applies to Number A. To specify for Number B,
operate “Disp. call/receive No.” of “2in1 setting”.
1
m
Set./Service
Incoming call
Disp. call/receive No.
Do the following operations.
+
m
-
6
-
6
<Font>
Changing Character Font
Information
Some characters are displayed in “Font 1” regardless of the setting of this function.
You cannot change the font of a phone number entry or clock display.
Set Character Font and Color of Phone Numbers
Font of dial number
Select a pattern.
Font color
Select a color.
You can switch between 16 color and 256 color by pressing
c
(
).
You can reset the set color by pressing
i
(
).
Information
If you change the background color by “Color theme setting” or “Kisekae Tool”, the
font color automatically changes as well.
