102
Ph
on
ebo
ok
Just vocalize the other party’s voice dial name and then the Phonebook
entry is accessed for making a call.
You can store up to 100 voice dial entries selecting from among the
Phonebook entries stored in the FOMA terminal (Phone).
1
m
Phonebook
Phonebook settings
Voice dial setting
<New>
You can edit the stored voice dial name by pressing
l
(
). Go to step 3.
To delete the stored voice dial entry, press
i
(
) and select “Delete” or
“Delete all” and then select “YES”.
2
Search the Phonebook
Select a Phonebook entry.
The display for search method you used last time appears.
The “
★
” mark is added to the Phonebook entry stored in the Voice Dial list.
3
Enter a voice dial name.
You can enter up to 22 half-pitch katakana characters.
The reading (katakana only) of the Phonebook entry is displayed as the voice dial
name. Correct the name to the easy-to-identify words.
When you set “Restrict dialing” to a Phonebook entry of memory number 000 through
009, set it to the first phone number in the Phonebook entry.
When you store a Phonebook entry of memory number from 000 through 009 as
secret data, make a call to that entry in Secret Mode or Secret Data Only.
<Voice Dial>
Accessing Phonebook Entries by Voice
+
m
-
2
-
6
Voice Dial Setting
Information
Information
The voice dial name set by this function is effective only for calling up a voice dial
entry. For the voice guidance function, the reading (name) stored in the Phonebook is
read aloud.
By your voice, you can access the Phonebook entry you set in the Voice
Dial list. When “Read aloud settings” is set to “ON” and “Voice dial” is
checked, the operation is guided by the voice guidance.
1
d
(for at least one second)
As soon as the voice recognition start tone sounds,
vocalize the voice dial name.
Start vocalizing within four seconds after the voice recognition start tone sounds.
Once the voice is recognized as a voice dial entry, the detected result is displayed.
You cannot change the volume of the voice recognition start tone. The voice
recognition start tone does not sound during Manner Mode.
If you say the word “
ボイス設定
(Boisusettei)”, the display of “Voice settings”
appears. (See page 103)
When “Auto voice dial” is set to “ON”, the display for Auto Voice Dial appears
after the voice is recognized as a voice dial entry. Then about two seconds later,
the FOMA terminal automatically dials out.
You cannot access a voice dial entry even by pressing and holding
d
for at
least one second from the horizontal Stand-by display.
2
Highlight a detected result and press
d
or
O
o
(
).
The first phone number in the selected Phonebook entry is dialed.
You can show the detailed Phonebook display by pressing
l
(
).
Highlight a phone number and press
d
or
O
o
(
) to make a voice call.
Also, you can make a videophone call by pressing
l
(
) or a PushTalk
call by pressing
p
.
When multiple similar voice dial names are stored or when the voice dial name is
short, the recognition rate lowers and a wrong voice dial entry (Phonebook entry)
might be accessed. In this case, rename the existing voice dial name and store it.
You cannot store “
ボイスセッテイ
(Boisusettei)” as a voice dial name.
Dial from Phonebook by Voice
Information
Information
When you vocalize, keep your mouth away from the microphone about 10 cm. If your
voice is too distant, it may be difficult to recognize your voice.
