191
Mai
l
You can save up to 2,500 received SMS messages including i-mode mail
messages.
You can move/copy the received SMS messages to the UIM. (See page 418)
1
When an SMS message arrives,
“ (pink)” lights and the receiving
message is displayed.
When receiving ends, the display shows the number of
received SMS messages.
You can display the Inbox list by selecting “Mail”.
If no keys are pressed for about 15 seconds, “
” (see page 30) appears on
the desktop and the former display returns. (The transit time varies depending on
the setting for “Mail/Msg. ring time”.)
Press
O
o
, highlight “
”, and press
O
o
(
) to display the Inbox list.
See page 33 for when the FOMA terminal is closed.
Save
You can save the SMS message you are composing or editing to
the Draft.
You cannot save the message when the address field and text
field are blank.
SMS report req.
See page 192.
SMS valid. per.
See page 192.
SMS input char.
See page 192.
<Receive SMS>
Receiving SMS Automatically
Reception Result
display
Information
When the number of unread or protected messages in the Inbox has reached the
maximum, no new messages can be received and “
(dark blue)” is displayed. To
receive SMS messages, delete mail in the Inbox or read unread mail or release
protection until “
(dark blue)” clears, and then perform “Check new SMS”.
If you receive connection SMS, it is displayed in the Inbox list by the order that FOMA
terminal received.
1
Reception Result display
Select an SMS message to be
displayed.
Press and hold
N
o
for at least one second from the
detailed SMS display to change the size of characters.
(See “Mail” on page 123)
When SMS messages arrive at the SMS Center, they are automatically
sent to your FOMA terminal, but will be held at the SMS Center if your
FOMA terminal cannot receive messages such as when it is off or out of
the service area.
You can receive the messages by “Check new SMS”.
1
m
Check new SMS
2
Return
If the Center holds SMS messages, the FOMA terminal automatically receives
them.
Display Newly Received SMS Messages
Information
Depending on the characters entered in the received SMS message, spaces might be
displayed.
While the sender’s address (phone number) is highlighted in the displayed SMS
message, you can press
+
O
o
(
) to make a voice call, videophone call, or
PushTalk call to the displayed number (the Phone To/AV Phone To function).
Further, if the sender’s phone number is stored in the Phonebook, the stored “name”
is highlighted. In this case, you can dial the phone number in the same way.
A Short Mail message is received as an SMS message on the FOMA terminal. When
the sender does not notify you of the phone number, the reason is displayed in the
sender’s field.
<Check New SMS>
Checking New SMS
Information
Some SMS messages are not delivered immediately after checking.
