275
e18_nb10_7e.fm
[275/292]
Ap
pe
nd
ix
/T
ro
ub
le
sho
o
ti
ng
■
Terminal operation
■
Calling
Becomes hot while operating/charging
Temperature of the FOMA terminal, battery pack, or adapter
may rise while operating or charging, or when watching 1Seg
for a long time with charging. There is no safety hazard.
P. 37
Battery usage time is short
Make sure the battery pack is not left for a long time outside the
service area.
Outside the service area, since electric waves are searched to
make transmission available, more electric power than usual is
used.
P. 37
The usage time for the battery pack depends on the usage
environment and deterioration level.
P. 37
Battery pack is a consumable product. Service time per charge
is gradually reduced every time the battery is charged.
Purchase a specified new battery pack if the usage time
becomes extremely shorter than when the battery was
purchased even after fully charged.
P. 37
Power turns off/The FOMA terminal restarts
Unclean terminals for the battery pack may result in poor
connections and loss of power. Wipe with a dry cloth or a
cotton swab.
–
Make sure the IC portion of the UIM is not dirty.
P. 34
Not activated by touching or pressing keys
Make sure Close lock is not set.
P. 69
Make sure the FOMA terminal is not turned off.
P. 39
Screen response is slow when touching or pressing keys
This may happen when a great deal of data is saved in the
FOMA terminal, or when a large amount of data is transferred
between the FOMA terminal and the microSD Card.
P. 172
P. 289
UIM does not recognize
Is a UIM inserted facing right direction?
P. 35
Data is not displayed properly, or operation does not work properly
Reset the FOMA terminal.
P. 74
Calls cannot be made
Make sure Close lock is not set.
P. 69
Make sure Restrict calls is not set.
P. 70
Make sure Offline mode is not set.
P. 70
Ring tone does not sound
Make sure phone ring volume is not set to [0].
P. 212
Make sure Manner mode or Offline mode is not set.
P. 53
P. 70
Make sure Reject calls, Reject calls by reason of
non-disclosure, or Reject unknown is not set.
P. 71
P. 72
Make sure ringing time for Voice Mail Service or Call
Forwarding Service is not set to “0 seconds”.
P. 240
P. 242
Connection cannot be made ([
(
] does not disappear even after
moving to another place, or calls cannot be made/received even
though signal status is not bad)
Turn the power on again, or attach the battery pack or UIM
again.
P. 34
P. 35
P. 39
Depending on the signal type, even though status is “inside the
service area” or “[
!
] (indicating signal status) appears”,
making/receiving a call may not be available. Move to another
place and call again.
P. 24
Make sure the call restriction such as Reject calls, etc. is not
set.
P. 71
In crowded place, heavy telephone/mail traffic may be caused
and makes it difficult to get a connection. In such case, [Please
wait] appears and a busy signal is played. Move to another
place or call again later.
–
Calls cannot be made with speed dial
Make sure Restrict address book is not set.
P. 70
Make sure Close lock is not set.
P. 69
nb10_e.book 275 ページ ２０１０年７月８日 木曜日 午前８時３３分
