155
e10_nb10_7e.fm
[155/164]
1Se
g
If you use 1Seg for a long time while charging, the service life of the
battery pack may be shorter than estimated.
DOCOMO shall not be liable for any loss or change of the saved data
due to malfunctions, repairs or other handling of the FOMA terminal.
When changing the model or asking for repair of your FOMA terminal,
you cannot transfer the stored information (video taken from 1Seg,
TVlink, data in the broadcasting storage area, etc.) in the terminal.
You cannot use 1Seg overseas since the broadcasting format and the
broadcasting frequency are different (You can watch 1Seg programs
video-recorded on the FOMA terminal).
Example: When watching 1Seg for the first time
To watch 1Seg, you need to set the channels and select an area
with channels set in advance.
Select a prefecture/locality from information with the preset broadcast
stations of each area. The terminal begins to search for broadcast
stations and then registers the area.
You can register up to ten areas. You can register up to 12 stations in an
area.
Perform channel setting inside the area of a terrestrial digital TV
broadcasting service.
1
In the main menu, [One-Seg]
/
[Yes]
:
When 1Seg is activated for the first time, a confirmation screen
asking whether to set channels appears.
2
Select a region
3
Select a prefecture
4
Select a locality
:
Searching for broadcast stations starts.
:
To cancel channel setting: During searching for stations, [Cancel]
• If you cancel the channel setting, channels are set according to the
channel information registered in the FOMA terminal.
5
[OK]
1
In the 1Seg watching screen,
z
/
[Channel
Setting]
/
[Change Area]
2
Select an area
Before using 1Seg
Procedures for watching 1Seg
STEP1
Setting channels
n
P. 155
Set channels corresponding to your region and select an area.
STEP2
Watching 1Seg
n
P. 156
Activate 1Seg.
Setting channels
Selecting area to be used
<Change Area>
If you move out of the selected area while watching 1Seg, a
confirmation screen appears asking whether to switch to available area.
Select [Yes] to display the area list screen and change the area.
nb10_e.book 155 ページ ２０１０年７月８日 木曜日 午前８時３３分
