15
e01_nb10_7e.fm
[15/20]
Continued on next page
Co
nte
n
ts/
P
rec
auti
o
ns
Do not expose to water.
The FOMA terminal, battery pack, adapter
and UIM are not waterproof. Do not use in
humid or steamy areas such as bathrooms
and avoid exposing to rain and other forms of
moisture. If the FOMA terminal is carried
close to skin, perspiration may cause internal
components to corrode and result in
malfunction. Note that if problem is found to
be due to moisture, handset and parts are not
covered by warranty and in some cases may
be irreparable. Even where repairs are
possible, repair charges will be incurred since
damage is not covered by warranty.
Clean only with a soft and dry cloth
(such as the type used for eyeglasses).
• Forceful rubbing of LCD with a dry cloth
may scratch LCD surface.
• Note also that LCD coating may stain if
moisture or soiling is left on the surface for a
long period.
• Never use chemicals such as alcohol,
thinners, benzene or detergents, as these
agents may erase the printing on the
handset or cause discoloration.
Occasionally clean terminals with a dry
cotton swab, etc.
Unclean terminals may result in poor
connections and loss of power. Keep terminal
clean with a dry cotton swab, etc.
Take care of the terminal while cleaning it.
Material list
Part
Material/Surface
treatment
Surface of
FOMA
terminal
Back of hinge
section, Metal
section of
display side
Magnesium/
Coating
Display side,
Back of
display side,
Keyboard
side, Back of
keyboard
side, Front of
hinge section
ABS/Coating,
Hard coating
Sides
RENY/Coating,
Hard coating
Display
Polyester
(antiscattering
film)/Hard coating
Incoming/Charging lamp
ABS/Material
Camera window
PMMA/Hard
coating
Back cover
ABS/Coating,
Hard coating
Picture Light
PC/Material
Protective cover
Elastomer/
Material
Antiskid section
Elastomer/
Material
Operation
key
Power/End
key, Home
key, Back
key, Menu
key
PC/Coating, Hard
coating
Keyboard
ABS/Coating,
Hard coating
Trackball
Fluorine-contained
rubber/Material
External
connector
terminal
External
connector
terminal
SUS/Nickel plating
Cover
PC/Coating, Hard
coating
Earphone/
Microphone
terminal
Earphone/
Microphone
terminal
SUS/Tin plating
Cover
PC/Coating, Hard
coating
Infrared port
ABS/Material
Inside microSD Card slot
SUS/Nickel plating
UIM tray
POM/Grain finish
Battery storage side
PET/Material
Battery storage section
ABS/Material
Battery
terminal
Battery
terminal
connector
LCP/Material
Battery
terminal
Copper alloy/Gold
plating
Battery
pack
Battery pack
PA (Polyamide),
PC
(Polycarbonate)/
Spark erosion
Terminal
section
Copper alloy/Full
surface nickel with
plating base, Gold
plating
Part
Material/Surface
treatment
Handling precautions
General notes
nb10_e.book 15 ページ 2010年7月8日 木曜日 午前8時33分