228
e13_nb10_7e.fm
[228/228]
Wi-Fi/Data Commun
ic
atio
n/Co
nn
ection
When the subscriber of “Pake-hodai double/Pake-hodai simple”, etc.
uses packet transmission by the international roaming, change of
settings from the Smartphone flat-rate access point to the pay-as-you-go
access point is required (
n
P. 248). Also, before returning to Japan,
make sure to change the settings from the pay-as-you-go access point to
the Smartphone flat-rate access point.
Before using the flat-rate communication service, set the Smartphone
flat-rate access point.
If your Internet access provider is “mopera U”, the Smartphone flat-rate
access point is already set by default.
1
In the main menu, [Settings]
/
[Transmission]
/
[Mobile network settings]
/
[Access Point Names]
/
[mopera U(
スマートフォン定額
)] (mopera U
(Smartphone flat-rate))
Check followings if the connection using the Smartphone flat-rate access
point is not available.
If the connection using the Smartphone flat-rate access point is still not
available after trying the above, contact “docomo Smartphone Care” on the
back of this manual.
If you delete “mopera U(
スマートフォン定額
)” (mopera U (Smartphone
flat-rate)) by mistake, re-register the access point on the FOMA terminal
following steps below.
Entering user name, password or domain is not required.
Never set the MCC to other than 440 and the MNC to other than 10.
They do not appear on the screen.
1
In the main menu, [Settings]
/
[Transmission]
/
[Mobile network settings]
/
[Access Point Names]
/
[MENU]
/
[New APN]
2
[Name]
/
enter “mopera U(
スマートフォン定額
)”
(mopera U (Smartphone flat-rate))
/
[OK]
3
[APN]
/
enter “mpr2.bizho.net”
/
[OK]
4
[MENU]
/
[Save]
Setting Smartphone flat-rate access point
When connection to Smartphone flat-rate
access point is not available
Condition
Response
Cannot connect to
Smartphone flat-rate
access point
Check if the external device is connected or
Bluetooth is disabled (
n
P. 222).
Connection cannot be
established overseas
“Pake-hodai double/Pake-hodai simple” is
not available overseas. Connect to an
access point other than the Smartphone
flat-rate access point.
Radio signal is weak
Move to a location with stable radio signals.
The connection is made to
non-Smartphone flat-rate
access point
Change the modem setting to connect to the
Smartphone flat-rate access point.
Re-registering Smartphone flat-rate access point
nb10_e.book 228 ページ 2010年7月8日 木曜日 午前8時33分