Docomo foma SO705i, Instruction Manual, Page: 446 / 485

25
2
Click "
ダイヤル
" (Dial) and execute
access operation
You can leave user name and password blank for
the mopera U or mopera connection. If you
select an Internet service provider other than
mopera U, mopera or you use dial-up
connection, enter the "
ユーザー名 " (User name)
and " パスワード " (Password) and click
" ダイヤル " (Dial).
<The Connecting screen appears>
While this screen appears, the log-on process
such as confirmation of the user name and
password is performed.
<Completion of the connection>
When the connection is complete, a message
appears from the indicator of the taskbar
located on the bottom-right of the desktop for
a few seconds.
You can start browser software to view sites
and websites or to use e-mail.
If this message does not appear, check
“Setting up Dial-up Network” (p.29) and
“Setting up Dial-up” (p.36).
d
During packet communication, a different icon appears on the FOMA terminal depending on the
communication conditions.
(Communicating, sending data)
(Communicating, receiving data)
(Communicating, no data transfer)
(Sending, or disconnecting)
(Receiving, or disconnecting)
d
" " appears on the FOMA terminal during 64K data communication.
NOTE
d
When executing data communication by using the FOMA USB Cable with Charge Function 01/02 (optional), dialing
from the dial-up icon is only valid for the FOMA terminal used when the icon is created.
Therefore, to connect to another FOMA terminal, the communication setting file (drivers) must be installed again.