Docomo foma SO705i, Instruction Manual, Page: 334 / 485

332
Over
s
eas U
se
Setting the Search Mode of
the Operator
<NW search mode>
When you move out of the service area of the
operator you are using, the FOMA terminal is
reconnected to another operator’s network.
z
This function may not be set depending on the
conditions of radio waves or networks.
z
As of January 200 8 , no service provider other than
DoCoMo can be selected in Japan.
z
When “ ” appears when you return to Japan,
check that “NW search mode” is set to “Auto”.
Changing the operator manually
1
i
“Settings” “Int’l roaming set”
“NW search mode” “Display ON” or
“Display OFF”
The “NW search mode”
screen appears.
2
“Manual” Select an
operator
■ To switch the operator
automatically
“Auto”
You can set an operator to be preferably
connected when searching the operator
automatically.
→ p.332
Re-searching for the network
<Network re-search>
z
You can re-search for a network then connect to the
network if “NW search mode” is set to “Auto” and
an operator could not be searched for, or if “NW
search mode” is set to “Manual” and you want to
change operators.
1 NW search mode screen (p.332)
“Network re-search” Select an
operator
■ When “NW search mode” is set to “Auto”
“Network re-search”
Setting an operator to be preferably
connected
You can set an operator to be preferably connected
when searching or re-searching the network
automatically.
z
The PLMN network list can store up to 20
operators.
z
Operators designated by DoCoMo are stored to the
PLMN network list.
1
NW search mode screen (p.332)
“PLMN setting”
The “PLMN setting” screen
appears. Operators are
listed in the priority order.
2 Highlight the operator
whose priority is to be
changed
u
(FUNC)
“Change priority”
3
Highlight the position
to move to
d
(Select)
The selected operator moves to the position
above the highlighted item. Select “<last>” to
move to the end.
4
o
(Finish) “YES”
PLMN setting screen (p.332)
PLMN manual select
……
Enters and stores Country
code (Operator Code (MCC)) and Network code
(Operator Code (MNC)).
PLMN select …… Selects and stores the operator from
the list.
Set VPLMN to PLMN
……
Stores the currently selected
operator.
Change priority → p.332
Delete …… Selects the deleting method from “Delete this/
Delete selected/Delete all”.
“About multiple-choice”
→
p.39
NW search mode
N
z
The priority may not apply depending on the
conditions of radio waves or networks.
PLMN setting
Function menu p.332