Docomo foma SO705i, Instruction Manual

Page: 321 / 485

319 Continued on next page
N
etw
o
rk Ser
vi
ces
Switching phone numbers each time
when making a call
When 2in1 is set to ON and the mode is set to Dual
mode, phone numbers can be switched when making
a call.
z
This function is available only on the detail screen
of “Phonebook/Received calls/Dialed calls/Redial”.
<Example: When making a call using the
phonebook>
1
Phonebook detail screen (p.79)
u
(FUNC) “Dial setting” “2in1/Multi
Num.” Select any item:
Number A …… Allows calls to be made from Number
A.
Number B …… Allows calls to be made from Number
B.
Cancel number
……
Releases the setting and allows
calls to made according to Phonebook 2in1 setting.
OFFICEED
<OFFICEED>
“OFFICEED” is an in-group flat-rate service provided
by specified Inbuilding Mobile Communication
System (IMCS). A separate subscription is required
to use the service. For details, visit DoCoMo website
for corporates (http://www.docomo.biz/d/212/)
(Japanese).
Adding and Using Services
<Additional service>
When a new network service is added by DoCoMo,
you can add the service to the menu and use the
service.
Adding new services and response
messages
1
i
“Service” “Additional service”
Select any item:
Additional service
……
Adds new services.
Highlight “<Not stored>”
u
(FUNC) “Add
new service” Enter the service name Select
any item:
You can enter up to 10 double-byte or 20 single-byte
characters for the service name.
Enter number …… Uses the number to
connect.
You can enter up to 20 digits.
Enter USSD number
……
Uses the service
code to connect.
You can enter up to 40 digits.
<Disp. call/receive No.>
z
Names, phone numbers and mail addresses in the
screens below will be displayed in the set color.
• In-call screen
• Dialing/Receiving screen
• Redial/Dialed calls (list/detail)
• Received calls (list/detail)
• Sent
*
/Received address record screen (list/detail)
• Chaku-moji Sent messages record screen
* : In B mode, the screen for sent addresses cannot be
displayed.
z
The setting for Number A/Number B (Address A/
Address B) applies to each screen even when 2in1 is
set to OFF.
<Ringtone for Number B>
z
When making the same settings to Number A and
Address A, set each item as “Same as Number A”.
z
When the ring tone settings are duplicated, the priority
applies.
→
p. 8 9
When you receive a call without caller ID on Number
B, priority is given to the “Ringtone for Number B”
setting.
N
z
“2in1/Multi Num.” in the function menu cannot be
selected when the mode is set to A mode or B mode.
N
z
When the following operations are performed, the
phone number selection screen is displayed and the
phone number to use can be selected.
• When making calls by entering phone number in the
phone number entry screen
• When using services from the special number
registered in Additional service
• When “Dialing” from the function menu in Sent/
Received address list is selected
• When using the Phone to function
• When pressing the switch on the flat-plug earphone/
microphone with switch (optional) on the phone
number entry screen
z
Dialing or AT command dialing from an external device
uses Number A for A mode/Dual mode and Number B
for B mode.
N