Docomo foma SO705i, Instruction Manual

Page: 434 / 485

13
Procedures ranging from installation of the FOMA PC
setting software to connection to the Internet
Install the "FOMA PC setting software"
See p.14 for installation details.
When the "Previous FOMA PC setting software" is installed, uninstall it before
installing the "FOMA PC setting software Ver4.0.0".
When the "Previous FOMA PC setting software" is installed, you cannot install the
"FOMA PC setting software Ver4.0.0".
If a screen appears indicating that "Previous W-TCP setting software" or "Previous
APN setting software" is installed, see p.15.
Make preparations for making various settings
Before making various settings, ensure that the FOMA terminal is connected to the
PC and has been properly recognized by the PC.
See p.7 for how to connect the FOMA terminal to the PC.
See "Setting the PC" (p.9) for how to make the PC recognize the FOMA terminal
properly.
If the FOMA terminal is not properly recognized by the PC, you cannot make various
settings nor perform communication.
In this case, see p.9 and install the communication setting file.
Set according to the communication method you use
Easy settings: "Settings for Packet communication using mopera U or mopera"
→ p.19
Easy settings: "Settings for Packet communication using other providers" → p.20
Easy settings: "Settings for 64K data communication using mopera U or mopera"
→
p.22
Easy settings: "Settings for 64K data communication using other providers"
→ p.23
For other settings, see p.27 or the following pages.
Connect to the Internet
See p.24 for the executing communication.
Installing software
Setting
preparation
Various
settings
Connecting