Docomo FOMA SH906i, Instruction Manual

Page: 68 / 596

66
e03_dv55_7e.fm
[66/84]
Vo
ic
e/Vi
d
eop
ho
ne
C
al
ls
3
Enter a message
/ t
.
■
Enabling/Disabling a message display
<Message display>
1
In the Custom menu, select [Settings]
/
[Other NW
Services]
/
[Chaku-moji]
/
[Message display].
2
Select the display method
/ t
.
1
In stand-by, enter a phone number
/ m
(or
C /
[Chaku-moji]).
2
Select a message.
Š Select [Create message]
/
enter a message
/ t
.
Š Select [Select message]
/
select a message
/ t
.
Š Select [Sent messages]
/
select a message
/ t
.
3
Press
s
(Phone)/
i
(V.phone).
If Chaku-moji reaches the recipient, [Transmission completed]
appears and transmission charges are incurred.
Dialing with message
<Chaku-moji>
Note
Alternatively, press
m
or display Submenus in the Phonebook,
Redial or Received calls details screen to make calls with
messages.
On Redial voice call, Chaku-moji used when a Videophone was
dialed will be automatically sent.
In the following setting, transmission charges are applied.
When the sending result does not appear even if the other party
has sent Chaku-moji, due to the signal strength
When a call is shorter than the set ringing time of the Set mute
ring time
When the call recipient is in the following setting, Chaku-moji does
not appear and transmission charges are not incurred even if
dialed with Chaku-moji.
When the recipient’s terminal does not support Chaku-moji
When a call is received from numbers rejected by the message
display settings
In addition, when the call recipient is in the following setting or status,
the send results do not appear on the sender side display
(Chaku-moji is not recorded in Received calls on the receiver side).
When the handset is outside the service area or the power is
turned off
When the Public mode (Drive mode) is set
When the answering duration for Record message is set to [0
seconds]
The ten most recently sent messages are recorded as Sent
messages.
For overseas usage, Chaku-moji cannot be sent or received.
Chaku-moji does not support PushTalk.
Related Operations
Delete Sent messages
1
In step 2 of “Dialing with message”, select [Sent
messages]
/
select a message
/ C
.
2
Select the deletion method.
Š Select [Delete one].
Š Select [Delete all]
/
enter the terminal security code
/ t
.
3
Select [Yes].
dv55_E.book 66 ページ ２００８年５月６日 火曜日 午前８時５９分