Docomo FOMA SH906i, Instruction Manual

Page: 583 / 596

34
Manual for PC connection setting_DV55.fm
AT+CMEE=<n> Sets the manner to display FOMA
terminal error reports. *1
Sets whether to display errors only as
“ERROR”, or to display reason with text or
numerical value.
<n>
0:
Displays “ERROR” and no result codes
(default setting)
1: Displays result codes with numerical
values
2: Displays result codes with text
When reports are set to display by setting
“n=1” or “n=2”, they are displayed in the
following format:
+CME ERROR:xxxx
xxxx is a numerical value or text. Refer to “Error
reports” (
n P. 39).
AT+CMEE=0
o
OK
AT+CNUM
o
ERROR
AT+CMEE=1
o
OK
AT+CNUM
o
+CME ERROR:10
AT+CNUM Displays FOMA terminal phone
number.
*2
number: Phone number
type
: 129 or 145
129: Does not i international access code
145: In international access code
AT+CNUM
o
+CNUM:,“+8190
12345678”,145
OK
AT+COPS=[<m
ode>[,<format>[
,<oper>]]] Selects a telecommunications
carrier to be connected.
*2
<mode>
0:
Auto (Automatically searches network
and switch telecommunications carriers)
1: Manual (Connects to the
telecommunications carrier specified in
<oper>)
2: Cancels (disconnects) the connection to
the telecommunications carrier
※
Unsupported.
3: Does not make mapping
4: Manual auto (Performs “Auto” processing if
not connected to the telecommunications
carrier specified in <oper>)
※
Unsupported.
<format>
2:
Fixed value
<oper> is indicated by a hexadecimal number
consisting of a country code (MCC) and a
network code (MNC).
The formats are shown below.
Digit 1 of MCC...octet 1 bits 1 to 4.
Digit 2 of MCC...octet 1 bits 5 to 8.
Digit 3 of MCC...octet 2 bits 1 to 4.
Digit 3 of MNC...octet 2 bits 5 to 8.
Digit 2 of MNC...octet 3 bits 5 to 8.
Digit 1 of MNC...octet 3 bits 1 to 4.
AT+COPS
=1,2,“44F001”
o
OK
(Connects to
MCC:440MNC:10)
AT+CPAS Inquires the activity status of the
FOMA terminal.
*2
The result from this command is in the
following format.
+CPAS:<pas>
<pas>
0:
AT commands can be sent/received
1: AT commands cannot be sent/received
(does not send the +CPAS:1 result)
2: Unknown
3: AT commands can be sent/received and
the FOMA terminal is receiving a call
4: AT commands can be sent/received and
performing data communication
AT+CPAS
o
+CPAS:0
OK
AT command Overview Parameter/Explanation
Execution
example
[M]
[M]
[M]
[M]
Manual for PC connection setting_DV55.fm 34 ページ ２００８年５月６日 火曜日 午前８時５５分