Docomo FOMA SH906i, Instruction Manual

Page: 590 / 596

41
Manual for PC connection setting_DV55.fm
J
Command name: +CGEQREQ=[parameter]
Overview
Sets QoS (Quality of Service) required of the
network when establishing PPP packet
transmission.
Not stored in FOMA terminal’s memory with
AT&W commands. Not reset with AT&F or ATZ
commands.
Syntax
AT+CGEQREQ=[<cid> [,<Traffic class> [,<Maximum
bitrate UL> [,<Maximum bitrate DL> [,,,,<Maximum
SDU size>]]]]]
o
Parameter description
This setting is assigned to each cid by default
value.
<cid>
*
: 1 to 10
<Traffic class>
*
: 2 or 3
2: interactive (initial setting)
3: background
<Maximum bitrate UL>
*
: None (initial setting) or
64 to 384
<Maximum bitrate DL>
*
: None (initial setting) or
64 to 3648
However, even if the values of [Maximum bitrate
UL] and [Maximum bitrate DL] are permitted level,
they may be set to the values whose fractions
were discarded.
<Maximum SDU size>
*
When <PDP_type> is PPP with USB
connection: 1502 (initial setting)
When <PDP_type> is IP with USB connection:
1500 (initial setting)
When <PDP_type> is PPP with Bluetooth
connection: 10 to 1500 or 1502 (initial setting)
When <PDP_type> is IP with Bluetooth
connection: 10 to 1500 (initial setting)
<cid> is a number for managing hosts (APNs)
used for packet transmission, registered in the
FOMA terminal. It can be set between 1 and 10 in
the FOMA terminal. The default settings are
mopera.ne.jp for <cid>=1 and mopera.net for
<cid>=3. Set cid in 2 or 4 to 10.
Execution example
Setting (1) is set to each cid as initial setting.
(1) Command when requesting connection
without setting uplink/downlink speeds (for
<cid>=2, Traffic class=2)
AT+CGEQREQ=2
OK
(2) Command when requesting connection at
uplink speeds of 384 kbps, downlink speeds
of 3,648 kbps, and maximum permitting SDU
size 1500 (for <cid>=3, Traffic class=2)
AT+CGEQREQ=3,2,384,3648,,,,1500
OK
(3) Command when requesting connection
without setting uplink speeds of 384 kbps or
downlink speeds (for <cid>=4, Traffic class=2)
AT+CGEQREQ=4,2,384
OK
(4) Command when requesting connection at
downlink speeds of 3,648 kbps without setting
uplink speeds (for <cid>=5, Traffic class=2)
AT+CGEQREQ=5,2,,3648
OK
Operation when parameter is abbreviated
AT+CGEQREQ=
Returns all <cid> settings to default settings.
AT+CGEQREQ=<cid>
Returns specified <cid> setting to default setting.
AT+CGEQREQ=?
Displays list of values that can be set.
AT+CGEQREQ?
Displays current settings.
Manual for PC connection setting_DV55.fm 41 ページ ２００８年５月６日 火曜日 午前８時５５分