Docomo FOMA SH906i, Instruction Manual

Page: 67 / 596

e03_dv55_7e.fm
[65/84]
65
Continued on next page
Vo
ic
e/Vi
d
eop
ho
ne
C
al
ls
Send a message (Chaku-moji) at the same time when making
a voice call or Videophone call to display it on the other
party’s ringing phone and to previously tell the points.
Send up to 10 single/double-byte characters, pictographs or symbols.
Charges are applied to the sender side. Not applied to the receiver side.
Refer to the DoCoMo website or “Mobile Phone User’s Guide
[Network Services]” for details and compatible models of Chaku-moji.
While All lock is set or Function lock is applied to Chaku-moji,
Chaku-moji is not displayed even if it is received. When the lock is
disabled, the message contents can be checked in the received
calls details screen.
Chaku-moji appears only while a call is receiving (calling). When
the call is answered, Chaku-moji disappears.
Example: When Chaku-moji is received for a voice call
■
Saving a message
<Create message>
Save up to ten messages.
1
In the Custom menu, select [Settings]
/
[Other NW
Services]
/
[Chaku-moji]
/
[Create message].
2
Select a number
/ i
.
To check a saved message: Select a number
/ t
.
Add a phone number and the date and time of Redials/
Received calls in the schedule
<Create schedule>
1
In the list screen, select a phone number
/ C
.
In the details screen: Press
C
.
2
Select [Create schedule]
/
save a schedule.
Perform Display all/Limit display
<Display all/Limit display>
In the list screen/details screen, press
C /
[Display all]/
[Limit display].
Check the ringing time from Received calls
<Ringing time>
In the details screen, press
C /
[Ringing time].
Note (Related operations)
Deleting
If all Redials are deleted, Chaku-moji Sent messages are also
deleted.
If all Redials/Received calls are deleted, all Redials/Received
calls of Number A and Number B are also deleted respectively.
Display all/Limit display
When Set mute ring time is set to [ON] and Missed call history is
set to [OFF] and the following call not saved in phonebook is
received, the number does not appear in Received calls.
The call is disconnected during mute seconds duration
The call is disconnected due to weak signal strength
However, select [Display all] to show Received calls.
Ringing time
Ringing time cannot be checked for items with
g
in the
received calls list screen.
A ringing time of [0:00] appears when a call is rejected due to
Reject calls, Accept calls, Reject unknown, Reject calls by
reason of non-disclosure and Public mode (Drive mode)
settings.
Chaku-moji
Using Chaku-moji
Editing and setting message
Chaku-moji
dv55_E.book 65 ページ ２００８年５月６日 火曜日 午前８時５９分