Docomo FOMA SH906i, Instruction Manual

Page: 386 / 596

384
e18_dv55_7e.fm
[384/414]
Con
ven
ie
nt Fu
nc
tio
ns
1
In the Custom menu, select [Settings]
/
[General
settings]
/
[Auto power ON/OFF]
/
[Link alarm/
power ON].
2
Select [ON]
/
[Agree].
To disable the setting: Select [OFF].
Turn FOMA terminal off automatically at a specified time.
Set the correct date and time in advance (
n
P. 57).
Auto power OFF settings are repeated daily until disabled.
1
In the Custom menu, select [Settings]
/
[General
settings]
/
[Auto power ON/OFF]
/
[Auto power OFF].
2
Select the [Auto power OFF] field
/ t /
[ON].
To disable the setting: Select [OFF]
/ i
.
3
Select the [Time] field
/ t /
enter a time (24-hour
format)
/ t / i
.
■
When the set time arrives
The power is automatically turned off.
If other operations are being performed at the set time, a
confirmation screen appears. Select [Yes] or wait for approximately
1 minute without performing any operations to turn off the handset.
Sound a timer tone, LED, or activate the vibration after the
specified length of time passes.
Press a key (excluding
<
) to stop the timer tone.
For details on setting the timer tone
n
P. 109
For details on setting the LED
n
P. 123
For details on setting the vibrator
n
P. 111
1
In the Custom menu, select [LifeKit]
/
[Timer/
Alarm]
/
[Timer].
2
Enter a time (between 1 second and 99 minutes 59
seconds)
/ t
.
To reset the time to 3 minutes: Press
i
.
To stop/resume count: Press
t
.
To disable the timer: Press
H
.
Turning the handset on at the alarm time and
sounding alarm
<Link alarm/power ON>
Auto power OFF
Turning power off automatically
Note
If Auto power OFF and Alarm (Alarm/Schedule/Reception/
Recording) are set for the same time, Auto power OFF takes
priority.
The confirmation screen does not appear in the following cases.
Upon the end of the call or the operation, the previously displayed
screen or the stand-by display is returned, after which the
confirmation screen appears.
During a call While i-
a
ppli is running
During Ir exchange While software is being updated
Timer
Sounding alarm after set time
passes
Note
Even if a call or a message is received, the timer continues.
However, if the time arrives while the timer is not shown such as
during a call or when receiving mail, the alarm does not sound.
Related Operations
Use the timer in stand-by
<Timer>
In stand-by, enter a time (1 to 99 minutes)
/ t /
[Timer].
dv55_E.book 384 ページ ２００８年５月６日 火曜日 午前８時５９分