Docomo FOMA SH906i, Instruction Manual

Page: 131 / 596

129
e07_dv55_7e.fm
[129/142]
Security Settings
Set two security codes, PIN1 code and PIN2 code, on the FOMA card.
These security codes are set to [0000] by default but can be changed
by the user (
n
P. 131).
The PIN1 code is a four- to eight-digit security code that is entered
when the FOMA terminal is turned on or when a FOMA card is
inserted to prevent unauthorized use by a third party. Enter the PIN1
code to enable making/receiving calls and operating the handset. The
PIN2 code is four- to eight-digit security code that is entered for
performing operations such as applying for or using Client certificates,
or resetting total cost.
Use the previously set PIN1 and PIN2 codes when inserting an old
FOMA card into a newly purchased FOMA terminal.
PUK is an eight-digit number used to disable the PIN1/PIN2 code lock.
PUK cannot be changed by the user.
If PUK is incorrectly entered a total of ten times continuously, the
FOMA card is completely locked.
Change the terminal security code (four to eight digits).
1
In the Custom menu, select [Settings]
/
[Security]
/
[Change security code]
/
enter the
current terminal security code
/ t
.
2
Enter the new terminal security code
/ t /
enter
the new terminal security code again
/ t
.
PIN1 code/PIN2 code
PUK
Change security code
Changing the terminal security code
• Client certificate operations
• Access a FirstPass
compatible site
Enter the PIN1 code
Contact a DoCoMo Shop
If incorrectly
entered three times
continuously
If incorrectly
entered ten times
continuously
Enter PUK
Secure when the power is
turned on
/ /
Enter the PIN2 code
Set a new PIN code
OK
dv55_E.book 129 ページ ２００８年５月６日 火曜日 午前８時５９分