Docomo FOMA SH906i, Instruction Manual

Page: 353 / 596

e16_dv55_7e.fm
[351/362]
351
Continued on next page
D
ata Dis
p
lay/Ed
it/Ma
n
a
g
em
ent
Face the Infrared ports of the receiving and sending FOMA terminal
each other and set the distance between them to approximately 20
cm or less as shown above.
While doing Ir exchange, leave the Infrared ports facing each other
and do not move.
Ir exchange may not function properly directly under fluorescent
lights, near other equipment using infrared signals, or in areas of
direct sunlight.
If either of the infrared ports is dirty, Ir exchange will become difficult.
Take care not to scratch the ports, and wipe off any dirt with a soft cloth.
When Ir exchange could not be performed properly, the
confirmation screen whether to continue appears. Select [Yes] to try
again. Move the FOMA terminals close and try again.
IrSS™ exchange performs a transmission without confirming the
response of the receiver side since it uses a simplex
communication. For this reason, the sender side completes the
communication normally even if the receiver side does not.
Example: Phonebook
1
In stand-by, press
a
.
2
Select a name
/ C /
[Send data]
/
[Send Ir data].
In the details screen: Press
C /
[Send data]
/
[Send Ir data].
Set the receiving FOMA terminal to receive a single data item.
3
Select [Send]
/
[Yes].
1
In the Custom menu, select [LifeKit]
/
[Receive Ir
data]
/
[Receive]
/
[Yes].
Decome-Anime
Template
A B
Decome-Anime
Template list
–
Note
If overwriting of existing data with new data is selected when
receiving all the items of a function, all existing data for that
function will be deleted.
Phonebook
The Group setting of data that is received individually is always set
to [No groups].
When receiving all items, all owner information except own
number is overwritten.
[No Name] appears when data without name is received.
Mail
May not be able to receive the title completely but a part of it.
Location service client
The same location service client of phone number cannot be
saved more than once.
Precautions for using the Ir exchange function
Function One All
Storage
location
Storage order
Approx. 20 cm
or less
15°
15°
Infrared port
Infrared port
Sending and receiving data individually
Sending a single data item
<Send Ir data>
Receiving a single data item
<Receive Ir data>
dv55_E.book 351 ページ ２００８年５月６日 火曜日 午前８時５９分