Docomo FOMA SH906i, Instruction Manual

Page: 553 / 596

4
Manual for PC connection setting_DV55.fm
To connect the FOMA terminal to your PC via
FOMA USB Cable with Charge Function 01/02 for
a data communication, installation of the FOMA
communication setting file from the accompanying
CD-ROM is required (
n
P. 4 to P. 7).
Make data communication by connecting the
FOMA terminal wirelessly to a Bluetooth
communication compatible PC.
For details on Bluetooth connection
n
P. 7
Install the FOMA PC setup software from the
accompanying CD-ROM to a PC and make a
variety of necessary settings to perform a packet
transmission and 64K data communication
connecting the FOMA terminal to the PC (
n
P. 8).
The FirstPass PC software enables access to
FirstPass supported sites via a PC Web browser with
user certificates obtained by the FOMA terminal.
Refer to “FirstPassManual” on the accompanying
CD-ROM for details. Adobe
® Reader ® (version
6.0 or later is recommended) is required to view
“FirstPassManual” (PDF format).
Connect the FOMA terminal to your PC with
both devices turned on. If the FOMA
communication setting file is already installed,
appears on the FOMA terminal screen.
Refer to P. 7 for details on connecting the FOMA terminal
wirelessly to your PC using Bluetooth function.
1
Insert the FOMA side of the FOMA
USB Cable with Charge Function
01/02 (sold separately) into the
external connector terminal on the
FOMA terminal (
S
).
2
Insert the PC side of the FOMA USB
Cable with Charge Function 01/02
into the PC USB connector (
T
).
How to remove
1
Hold the release button on the FOMA terminal side of
the FOMA USB Cable with Charge Function 01/02
(
S
), and pull out from the FOMA terminal (
T
). Pull by
force may cause a malfunction.
2
Pull the FOMA USB Cable with Charge Function 01/02
out from the PC.
To make data communication by connecting
the FOMA terminal to a PC via FOMA USB
Cable with Charge Function 01/02 (sold
separately), the FOMA communication setting
file is required. Install the file before
connecting the FOMA terminal for the first
time to the PC.
For Bluetooth connection, installing the FOMA
communication setting file is not required.
Install on the PC using a user with administrator rights.
Perform steps 1 to 3 first, and then connect the FOMA
terminal to the PC.
FOMA communication setting file
Note
If installation fails and [FOMA SH906i] is not listed in
the screens of step 3 of “Confirming the installed
FOMA communication setting file (Driver)” on P. 5,
uninstall the FOMA communication setting file
(
n
P. 6) and install it again.
If, for some reason, the PC is unable to recognize the
FOMA terminal, uninstall the FOMA communication
setting file (
n
P. 6) and install it again.
Preparing Bluetooth connection
FOMA PC setup software/FirstPass
PC software
Connecting the FOMA
terminal to your PC
Connecting using the FOMA USB
Cable with Charge Function 01/02
Keep side with
the characters up
Open external connector
terminal cover
FOMA USB Cable
with Charge
Function 01/02
(sold separately)
T
S
Note
Set USB mode setting of the FOMA terminal handset
to [Communication mode] and connect.
Connecting the FOMA terminal while charging in the
desktop holder is also possible.
Do not remove the FOMA USB Cable with Charge
Function 01/02 during data transmission. Otherwise,
transmission disconnection or data loss may occur.
Installing the FOMA
communication setting file
Installing the FOMA communication
setting file (Driver)
Release button
Release button
S
T
Manual for PC connection setting_DV55.fm 4 ページ ２００８年５月６日 火曜日 午前８時５５分