Docomo FOMA SH906i, Instruction Manual

Page: 41 / 596

39
e02_dv55_7e.fm
[39/58]
Before Using the Hands
et
*1 When the 2in1 mode is set to [Dual mode], the number of [A mode]
and [B mode] appears each.
*2 When the 2in1 mode is set to [Dual mode], the total number of [A
mode] and [B mode] appears.
*3 The message that appears differs depending on the menu screen.
1
In stand-by, a stock icon appears
/ t
.
2
Select the stock icon
/ t
.
After the details are checked, the stock icon and message
disappear.
Use the Optical TOUCH CRUISER to perform the same
operations as those for
w
of Multi-guide key (e.g. moving
the cursor or scrolling the screen).
Move the pointer or cursor just as covering the whole operating
range of the Optical TOUCH CRUISER with finger.
The pointer or cursor moves in conjunction with sliding of the finger.
@
Send loc - No resp P. 276
Send loc - Resp P. 276
Send loc - Failed P. 276
4
Charge limit exceeded P. 398
G
Custom menu/Basic menu/Menu *3 P. 45
Note
Stock icons do not appear while the i-motion set as stand-by is
played or the i-
a
ppli stand-by is being activated.
In the viewer position, the messages and the notice details can be
checked by using Bluetooth compatible keyboard.
Icon Message Page
Optical TOUCH CRUISER
Note
In the following cases (screens), the Optical TOUCH CRUISER is
not available. However, when the Submenu appears, the pad can
be operated.
Stand-by i-
a
ppli Dial input screen
Character reader, Bar code reader, Card reader screen
While making, receiving or during the voice call/Videophone
call/PushTalk, etc.
Operating range of
Optical TOUCH
CRUISER
dv55_E.book 39 ページ ２００８年５月６日 火曜日 午前８時５９分