Docomo FOMA SH906i, Instruction Manual

Page: 589 / 596

40
Manual for PC connection setting_DV55.fm
J
Command name: +CGEQMIN=[parameter]
Overview
Registers criterion determining whether to permit
QoS (Quality of Service) sent from the network
when establishing PPP packet transmission.
Not stored in FOMA terminal’s memory with
AT&W commands. Not reset with AT&F or ATZ
commands.
Syntax
AT+CGEQMIN=[<cid> [,, <Maximum bitrate UL> [,
<Maximum bitrate DL>[,,,,<Maximum SDU size>]]]]
o
Parameter description
<cid>
*
: 1 to 10
<Maximum bitrate UL>
*
: None (initial setting) or 384
<Maximum bitrate DL> * : None (initial setting) or 3648
<Maximum SDU size>
*
When <PDP_type> is PPP with USB
connection: 1502 (initial setting)
When <PDP_type> is IP with USB connection:
1500 (initial setting)
When <PDP_type> is PPP with Bluetooth
connection: 10 (initial setting) to 1500 or 1502
When <PDP_type> is IP with Bluetooth
connection: 10 (initial setting) to 1500
<cid> is a number for managing hosts (APNs)
used for packet transmission, registered in the
FOMA terminal. It can be set between 1 and 10 in
the FOMA terminal. The default settings are
mopera.ne.jp for <cid>=1 and mopera.net for
<cid>=3. Set cid in 2 or 4 to 10. [Maximum bitrate
UL] and [Maximum bitrate DL] set the minimum
uplink and downlink transmission speed (kbps)
between the FOMA terminal and base station.
When set to [None] (default setting), all speeds
are permitted. However, when set to “384” and
“3648”, connections established under these
speeds are not permitted, so packet transmission
connection may not be established. Set the
maximum permitting SDU size for [Maximum
SDU size]. Note that when “10 (initial setting) to
1500 or 1502” is set for Bluetooth connection,
connections established under these values are
not permitted, and packet transmission may not
be connected. For USB connection, packet
transmission can be connected regardless of the
maximum permitting SDU size.
Execution examples
Setting (1) is the initial setting for all cid.
(1) Command permitting all uplink/downlink
speeds (for <cid>=2)
AT+CGEQMIN=2
o
OK
(2) Command permitting uplink speeds of 384
kbps, downlink speeds of 3,648 kbps, and
maximum permitting SDU size 1500 (for
<cid=3>)
AT+CGEQMIN=3,,384,3648,,,,1500
o
OK
(3) Command permitting uplink speeds of 384
kbps and all downlink speeds (for <cid>=4)
AT+CGEQMIN=4,,384
o
OK
(4) Command permitting all uplink speeds and
downlink speeds of 3,648 kbps (for <cid>=5)
AT+CGEQMIN=5,,,3648
o
OK
Operation when parameter is abbreviated
AT+CGEQMIN=
Clears all <cid> settings.
AT+CGEQMIN=<cid>
Returns specified <cid> setting to default setting.
AT+CGEQMIN=?
Displays list of values that can be set.
AT+CGEQMIN?
Displays current settings.
Manual for PC connection setting_DV55.fm 40 ページ ２００８年５月６日 火曜日 午前８時５５分