Docomo Foma P700i, Manual

Page: 69 / 565

66
Making
Calls/Receiving
Calls
Use to adjust the volume
Step ·····························The ring tone is silent for about three seconds, and then the volume steps
up every three seconds, from Level 1 through Level 6.
Levels 1 to 6 ···············Level 1 is the weakest volume and Level 6 the loudest.
Silent ···························The ring tone does not sound.
●
Following icons are displayed while the ring volume is set to “Silent”
: The ring volume for voice calls or video-phone calls is “Silent”.
: The ring volume for mail, chat mail or Messages R/F is “Silent”.
: The ring volume for voice calls, video-phone calls, mail, chat mail, and Messages R/F is “Silent”.
2
● You cannot adjust the ring volume during ringing.
Information
During ringing
The FOMA phone makes three rapid beeps for confirmation and the incoming call is put on hold.
●
The confirmation tone does not sound when “Phone” of “Ring volume” is “Silent” or while Manner Mode
is activated.
●
The caller hears the hold tone set for “On hold tone” of “Call response setting”. For video-phone calls,
the still image selected in “On hold” of “Select image” is displayed.
1
Press to release hold and take the call.
●
If a voice call is on hold, you can also press to release hold.
If “Answer setting” is set to “Any key answer”, you can release hold by pressing through , , ,
, , , , or .
●
If a video-phone is on hold, the image through your camera is sent to the other party by pressing to release hold. If you
press or to release hold, the substitutive image is sent.
2
<On Hold>
Putting an Incoming Call on Hold
●
The caller is charged for the call even during answer-hold.
●
If you press during answer-hold, the call will be disconnected.
●
If the caller on hold hangs up, the call will be disconnected.
●
If you have set “Open phone” to “Answer”, you cannot use Answer Hold for an incoming call while the FOMA phone is closed.
Information
Press or to release hold and take the call.
●
If a video-phone is on hold, the image through your camera is sent to the other party by pressing to release hold.
If you press or , to release hold, the substitutive image is sent.
●
If you have set “Fold setting” to “Tone on” and put the call on hold by closing, open the FOMA phone or connect the Flat-plug
Earphone/Microphone Set with Switch (option) to take the call.
If you connect the Flat-plug Earphone/Microphone Set with Switch to take the video-phone call, the substitutive image is sent
to the caller.
2
During a call
●
The other party hears the call-hold tone set for “Holding tone” of “Call response setting”. For video-phone calls, the still image
set for “Holding” of “Select image” is displayed.
●
You can put the call on hold by closing the FOMA phone during the call if you have set “Fold setting” to “Tone on”.
1
<Holding>
Putting a Call on Hold during a Call