Docomo Foma P700i, Manual

Page: 482 / 565

479
Data
Transmission
Connection speed
Character
notation
Numeric
notation
■
Packet Transmission
Value Reason
27 No APN was found; or an invalid APN was specified.
30 The line was disconnected from the network.
33 You do not apply the service option you requested.
36 The line was normally disconnected.
Numeric
notation Character
notation
Meaning
0 OK Processing has been executed normally
1 CONNECT The line has been connected to the other
party
2 RING An incoming call has arrived
3 NO CARRIER The line has been disconnected
4 ERROR The system can receive no command
6 NO DIALTONE The system can detect no dial tone
7 BUSY The system is detecting the busy tone
8 NO ANSWER Connection completed; timeout
100 RESTRICTION The network is restricted
101 DELAYED Within restricted redialing time
5 CONNECT 1200 1200 bps
10 CONNECT 2400 2400 bps
11 CONNECT 4800 4800 bps
13 CONNECT 7200 7200 bps
12 CONNECT 9600 9600 bps
15 CONNECT 14400 14400 bps
16 CONNECT 19200 19200 bps
17 CONNECT 38400 38400 bps
18 CONNECT 57600 57600 bps
19 CONNECT 115200 115200 bps
20 CONNECT 230400 230400 bps
21 CONNECT 460800 460800 bps
Result Codes
■
Result Code List
■
Extended Result Code List
For &E0
Connection speed between the FOMA phone and wireless
base station is displayed.
●
Result codes are displayed in the character notation (initial value)
when the ATV
n command (see page 477) is set to n =1 and displayed
in the numeric notation when it is set to n =0.
●
The baud rate is displayed to keep the compatibility with a modem
connected via the conventional RS-232C. The FOMA phone and
personal computer are however connected via the FOMA USB Cable
(option); so, the baud rate is different from the actual transmission
speed.
●
“RESTRICTION” (numeric code: 100) means that the transmission
network is congested. If this result code appears, wait for a while, then
connect the line again.
Information
Numeric notation Character notation Meaning
1 PPPoverUD Connected by 64K data
transmission
2 AV32K Connected by 32K video-phone
3 AV64K Connected by 64K video-phone
5 PACKET Connected by packet
transmission
■
Transmission Protocol Result Code List
●
When ATX0 is set:
CONNECT only appears at completion of the connection, regardless of
the contents specified in the AT
¥
V command (see page 477).
Example in character notation: ATD
＊
99
＊＊＊
1#
CONNECT
Example in numeric notation: ATD
＊
99
＊＊＊
1#
1
●
When ATX1 is set ※ :
・
If ATX1 and AT
¥
V0 are set (initial value):
A result code appears in the following format at completion of the
connection: “CONNECT<baud rate between the FOMA phone and
PC>”
Example in character notation: ATD
＊
99
＊＊＊
1#
CONNECT 460800
Example in numeric notation: ATD ＊ 99 ＊＊＊ 1#
1 21
・
If ATX1 and AT
¥
V1 are set ※ :
A result code appears in the following format at completion of the
connection: “CONNECT<baud rate between the FOMA phone and
PC> PACKET <access point name(APN)> / <maximum baud rate for
upload (the FOMA phone
→
wireless base station) > / <maximum
baud rate for download (the FOMA phone
←
wireless base
station)>”
Example in character notation: ATD ＊ 99 ＊＊＊ 1#
CONNECT 460800 PACKET
mopera.ne.jp /64/384
(Indicates that maximum 64 kbps for
upload and maximum 384 kbps for
download are connected to
mopera.ne.jp.)
Example in numeric notation: ATD
＊
99
＊＊＊
1#
1215
※ If you specify ATX1 and AT ¥ V1 at the same time, you may not
normally carry out the dial-up connection.
In this case, you should use only AT
¥
V0.
■
Result Code Display Examples
Connection speed
Character
notation
Numeric
notation
121 CONNECT 32000 32000 bps
122 CONNECT 64000 64000 bps
125 CONNECT 384000 384000 bps
For &E1