Docomo Foma P700i, Manual

Page: 114 / 565

111
Tone/Display/Light
Setting
Select a type of ring tone
Melody ························Selects a melody.
i
motion·····················Selects a moving image or i-motion movie.
Voice announce ·········Selects a recorded sound in “Voice announce”.
Selects “Voice announce 1” or “Voice announce 2”, and press . The setting is completed.
OFF······························The ring tone does not sound. The setting is completed.
3
●
The priority order of ring tones is; “Setting by phone number or mail address”
→
“Setting by group”
→
“Select ring tone”.
● The ring tone or images set at purchase might be played back or displayed for incoming calls or messages, depending on the
combination of this function and “Display setting”.
●
When you set an i-motion movie containing images and sound for a ring tone (Movie Ring Tone), the movie ring tone is played back
taking priority over “Display setting”. However, if you set an i-motion movie containing only voice (i-motion movie without image, such
as a singer’s voice) for the ring tone, the image set by “Display setting” is displayed.
●
You cannot set i-motion movies containing only moving images for ring tones.
● For the incoming call from the phone number that does not notify the Caller ID, you can use “Call setting w/o ID” to set the ring tone.
●
You cannot set some i-motion movies for the ring tone.
●
When different types of mail — i-mode mail, Short Message (SMS), chat mail, or Messages R/F — are received at the same time, the
priority order of ring tone is; “Chat mail”
→
“i-mode mail/Short message (SMS)”
→
“MessageR (Request)”
→
“MessageF (Free)”.
If you receive the same type of mail simultaneously, the ring tone corresponding to the mail you have received in the last works.
● Press ( ) in step 2 and you can check the ring tone or images actually played back or displayed.
●
For the melody downloaded from a site or attached to mail, or the melody prohibited to attach to mail or output from the FOMA phone,
a playing part may be specified in advance. When the play-part-specified-melody is set for the ring tone, the specified part only plays.
Information
Select a ring tone
●
If you select “Select calling disp.”, go to step 3 on page 123.
●
If you select “Select receiving disp.”, go to step 2 on page 121.
2
Select a folder Select a ring tone or an i-motion movie
●
See page 371 for the melody folder and list.
●
See page 354 for the i-motion folder and list.
4
You can set a ring tone for each phone number or mail address stored in the FOMA phone’s Phonebook.
Set by Phone Number or Mail Address
Detailed Phonebook display ( ) Utilities
Ring tone ····················Sets a ring tone or i-motion movie for a voice call and video-phone call from the specified phone
number.
Mail ring tone ·············Sets a ring tone or i-motion movie for i-mode mail from the specified mail address and Short
Message (SMS) from the specified phone number.
Go to step 3 on this page.
The set item is indicated by “
★
”.
●
See page 99 for how to search the Phonebook.
●
From the detailed display, press to bring up the phone number or mail address for which you set Utilities.
●
To release the ring tone for phone number or mail address, perform the same operation.
1
●
You cannot set the ring tone for the Phonebook entries stored in “Secret mode” or “Secret only mode” and in the UIM Phonebook.
●
Note that the “Ring tone” setting of “Utilities” is valid only when the Caller ID is provided. It is advisable to activate “Caller ID request”
in advance.
●
Note that this function is released if you change the set phone number or mail address.
●
To change the set ring tone, release the current setting and proceed.
●
If you receive the i-mode mail with the address “phone number@docomo.ne.jp”, the mail ring tone set for the phone number of the
Phonebook will play.
●
Use “Utilities” to check which phone number or mail address in the Phonebook is set, or to release the setting.
Information