Docomo Foma P700i, Manual

Page: 146 / 565

143
Safety
Settings
Enter the new PIN1 code or PIN2 code again
4
●
At the time you sign up for the FOMA phone, the PIN code entry setting is set to “OFF”.
● The PIN1 code, PIN2 code, and the PIN1 code setting are stored in the UIM. If you use the UIM in another FOMA phone, use the
PIN1 code and PIN2 code stored in that UIM. When the PIN1 code and PIN2 code have not been changed, “0000” will return.
Information
Releasing PIN Lock
Enter the PUK (PIN unblock code) (eight digits)
●
Check the application form for subscription to the FOMA phone service (copy for customer) passed
over to you for the PIN unblock code.
●
The entered unblock code is displayed as “_”.
1
If you enter a wrong PIN1 code/PIN2 code three times in succession on the display requiring its entry, the
PIN1 code/PIN2 code are locked and cannot be used. In this case, release the PIN1 code/PIN2 code and
enter a new PIN1 code/PIN2 code.
Turn the power on Enter the PIN1 code
If you enter a correct PIN1 code, the Stand-by display appears.
●
If you enter the Terminal Security Code for the first time, enter “0000”.
●
The entered PIN1 code is displayed as “_”.
●
If you enter the wrong PIN1 code three times in succession, further entry will be locked. (“Rest” appears on the display to
notify you of possible entering frequency.)
Enter the correct PIN1 code; “Rest” will return to three times.
See this page for how to release the PIN lock.
1
If you set “PIN1 code entry set” of “PIN setting” to “ON”, enter a four- to eight-digit PIN1 code after
turning on the power.
Entering PIN1 Code
●
You can dial emergency phone numbers 110/119/118 from the PIN1 Code Entry display.
Information
Enter the new PIN1 code/PIN2 code again
3
Enter a new PIN1 code/PIN2 code (four to eight digits)
●
The entered PIN1 code/PIN2 code is displayed as “_”.
2