Docomo Foma P700i, Manual

Page: 479 / 565

476
Data
Transmission
AT command Outline Parameter/Explanation Command execution example
ー
n : DCE by DTE
m : DTE by DCE
0: No flow control
1: XON/XOFF flow control
2: RS/CS (RTS/CTS) flow control
Initial value: n, m = 2.2
AT+IFC?: Inquires the set value.
n =22: W-CDMA (Wideband CDMA) only specifiable.
(initial value)
ー
<cid>: 1 to 10
Displays the APN defined by +CGDCONT.
When calling cid1, you can omit the phone number like
“ATD
＊
99
＊＊＊
#.”
n =0: Issues no echo-back.
n =1: Issues echo-back. (initial value)
n =0: Disconnects the line. (can be omitted)
n =0: Displays “NTT DoCoMo”.
n =1: Displays the product name. (same as +GMM)
n =2: Displays the version of the PPP packet function.
(same as +GMR)
n =0: Returns from the online command mode to the
online data mode. (can be omitted.)
n =0: Displays the result code. (initial value)
n =1: Does not display the result code.
n =0: Does not automatically receive an incoming call.
(initial value)
n =1 to 255: Automatically receives an incoming call
with the specified number of rings.
(when n
≧
10, does not automatically receive for a
packet (PPP) incoming call, then the line is
disconnected about 30 seconds after.)
ATS0?: Inquires the set value.
n =43: Initial value
n =127: Makes escape processing invalid.
ATS2?: Inquires the set value.
n =13: Initial value (n=13 only specifiable.)
ATS3?: Inquires the set value.
n =10: Initial value (n=10 only specifiable.)
ATS4?: Inquires the set value.
n =8: Initial value (n=8 only specifiable.)
ATS5?: Inquires the set value.
Displays the version of the
FOMA phone.
Selects the flow control method.
Selects the wireless
transmission network of the
FOMA phone.
Processes an incoming call in the
mode in which the FOMA phone
received the incoming call.
Executes the automatic
outgoing processing for the
FOMA phone according to the
contents specified in the
parameter and dial parameter.
Sets whether echo-back is
issued to the DTE in the
command mode.
Places the FOMA phone into
the on-hook state.
Displays the ID code.
Returns from the online
command mode to the online
data mode during transmission.
Sets whether the result code is
to be displayed for the DTE.
Sets the number of rings
required until the FOMA phone
automatically receives an
incoming call.
Sets the escape character.
Sets the carriage return (CR)
character.
Sets the line feed (LF)
character.
Sets the back space (BS)
character.
AT+GMR
[M]
AT+IFC=
n,m
[M]
[&F][&W]
AT+WS46=
n
[M]
[&F][&W]
ATA
[M]
ATD
[M]
ATE
n
[M]
[&F][&W]
ATH
n
[M]
ATI
n
[AT][M]
ATO
n
[M]
ATQ
n
[M]
[&F][&W]
ATS0=
n
[M]
[&F][&W]
ATS2=
n
[M]
[&F]
ATS3=
n
[M]
[&F]
ATS4=
n
[M]
[&F]
ATS5=
n
[M]
[&F]
AT+GMR
Ver1.00
OK
AT+IFC=2,2
OK
AT+WS46=22
OK
RING
ATA
CONNECT
ATD
＊
99
＊＊＊
1#
CONNECT
ATE1
OK
(During packet transmission)
+++
ATH
NO CARRIER
ATI0
NTT DoCoMo
OK
ATI1
FOMA P700i
OK
ATO
CONNECT
ATQ0
OK
ATQ1
(“OK” is not returned at this
time.)
ATS0=0
OK
ATS0?
000
OK
ATS2=43
OK
ATS2?
043
OK
ATS3=13
OK
ATS3?
013
OK
ATS4=10
OK
ATS4?
010
OK
ATS5=8
OK
ATS5?
008
OK