Docomo Foma P700i, Manual

Page: 156 / 565

153
Safety
Settings
Missed Calls Display
<Ringing Time>
Muting Ringing just after Receiving
Incoming call Ringing time Set mute seconds
Enter a mute time (seconds)
●
Enter from “00” through “99” in two digits.
If you enter “00”, the ringing operation starts as soon as a call comes in.
●
Not to change the specified mute time, do not enter the mute time; just press .
1
●
With the ringing operations, the ring tone sounds, vibrator vibrates, and Call/Charging indicator lights or flickers.
●
When a call comes in from the party whose phone number is stored in the Phonebook, the FOMA phone starts ringing as soon as the
call comes in even if “186/184” is added to the phone number. However, during PIM Lock, or for the call from the party whose phone
number is stored as secret, ringing starts according to the setting of this function.
●
If the mute time is longer than the ringing time for Record Message, the ringing operations do not start, activating Record Message
instead. To activate Record Message after starting the ringing operations, set the longer ringing time for Record Message than the
mute time. The same applies to the ringing time for Voice Mail Service, Call Forwarding Service, and Automatic Answer.
Information
Set Mute Seconds
Setting at purchase
0 seconds
You can specify the mute time before ringing starts, for when a call comes in from the party whose
phone number is not stored in the Phonebook. This function is effective as a countermeasure for
blocking nuisance calls such as one ring phone scam (one-giri).
Incoming call Ringing time Missed calls display
Display ························Displays a received call record, regardless of the ringing time.
Not display ·················Does not display a received call record when the ringing time is within the specified mute seconds.
1
Setting at purchase
Display
You can select whether to display the call disconnected in the specified time for “Set mute seconds” as a
received call record.
You can reject calls from anyone whose phone number is not stored in the Phonebook.
This function is valid only when the other party notifies his/her phone number. It is advisable to activate
“Caller ID request” and “Call setting w/o ID” simultaneously.
Lock/Security Reject unknown Enter the Terminal Security Code
Accept ·······Accepts calls from the phone numbers not stored in the Phonebook.
Reject ········Rejects calls from the phone numbers not stored in the Phonebook.
●
See page 140 for the Terminal Security Code.
1
●
During PIM Lock or if a call comes in from the party whose phone number is stored as secret, the call is not rejected, regardless of this setting.
●
If you simultaneously activate “Reject unknown” and “Call acceptation” of “Restrictions”, the latter has priority.
●
When a call comes in from anyone whose phone number is not stored in the Phonebook while you set this function to “Reject”, it is
stored as “Missed calls” in “Received calls”, and the Notification icon of “Missed call” appears on the Stand-by display. Also, the caller
hears a busy tone even if you have set Voice Mail Service or Call Forwarding Service to “Activate”. However, if you set the ringing
time for Voice Mail Service or Call Forwarding Service to 0 seconds, or when the FOMA phone is out of the service area, or when the
power is turned off, the busy tone will not be played, activating Voice Mail Service or Call Forwarding Service. Note that in this case
the record is not stored in “Received calls”, and the Notification icon of “Missed call” does not appear on the Stand-by display.
●
You can receive Short Message (SMS) or i-mode mail regardless of this setting.
Information
<Reject Unknown>
Setting at purchase
Accept
Rejecting Calls from Parties whose Phone Numbers are not Stored in Phonebooks