Docomo FOMA N601i, Manual

Page: 46 / 469

43 Getting Started Getting Started
e
When the FOMA card (UIM) is inserted, the Select language setting saved in the FOMA card (UIM) is applied.
e Selecting “English” for “Select language” gives you two options “ON” and “OFF” for “Display” under “Clock display”
and for “Info notice setting”.
<Initial setting>
Performing Initial Settings
After turning a FOMA terminal on, set “Set time”, “Change security code” and “Keypad sound” as initial settings.
d
If you have set any of the functions, the function’s setting screen does not appear.
d After Steps 1 to 5 are performed, the initial setting screen no longer appears. Even if you perform “Reset
settings” after those initial settings are completed, the initial setting screens do not appear.
d
When “PIN1 code entry set” is set to “ON”, the PIN1 code entry screen appears after you turn a FOMA
terminal on. Enter the correct PIN1 code to show the initial setting screens.
→
p.140
1
Initial setting screen X “YES”
2
Set time
Date and time are not set by default. Setting time
→
p.43
3
Change the security code
The default setting is “0000”. “Changing Your Security Code”
→
p.139
4
Set the font size
Setting the font size → p.128
5
Set the keypad sound
Keypad sound → p.115
6
Update software
A message asking whether to update software appears. Software Update → p.364
e Even if the operation of initial settings is interrupted because a call arrives or you press
y
or
t
, the functions
for which settings have been completed remain valid.
e
You can also perform initial settings separately for each function.
e
The confirmation screen to prompt software update appears even when initial settings are canceled.
<Set time>
MENU31
Setting Date and Time
Set the date and time on your FOMA terminal manually or the automatic correction of the date and time.
d
The set date and time appear on the standby screen, which allows you to use functions managing the date
and time (e.g. “Alarm clock” and “Schedule”).
d
To set the date and time in “Initial setting” (p.43), start with step 2.
d
You can set the date and time between 00:00 on January 1, 2004 and 23:59 on December 31, 2037. The
date and time will not be updated after 23:59 on December 31, 2037.
1
i
X “Settings” X “Clock” X “Set time”
2
Select any item
NOTE
For some guidance messages played for callers, you can switch the language mode between
Japanese and English.
→
p.313
NOTE
Auto time set ON
(default)
Sets the date and time automatically.
Selecting “Auto time set ON” receives the time information and sets the date and time
automatically.
Auto time set OFF Sets the date and time manually. Selecting this option allows you to set a time different from
the actual time.
Default setting
Auto time set ON
ＹＥＳ
ＮＯ
Initial setting
Ｉｎｉｔｉａｌ ｓｅｔｔｉｎｇ
Ｓｔａｒｔ
ｉｎｉｔｉａｌ ｓｅｔｔｉｎｇ
ＯＫ？
Default setting
Auto time set ON
Continued on next page